Advertisement
Operating the Web Screen
Web Screen Operations
You can see and download the image being captured by this unit using a Web browser in a room distant from the unit.
This may be helpful, e.g. when you want to observe the progress of a conference in another distant place.
• For operation, use "Single window system" and "Multiple window system" on the Web screen.
The operational procedure is the same. (See pages 10 and 11.)
• The major difference between "Single window system" and "Multiple window system" is the number of captured im-
ages that can be displayed. While "Single window system" can display the latest image, "Multiple window system" can
display the last eight updated images in addition to the latest one. Use either of them, according to your purpose.
• The operation may differ depending on the browser version.
The display examples in section "Operating the WEB Screen" (pages 9 to 11) are those with Internet Explorer 5.0.
To display the Web screen
1
Run Internet Explorer or
Netscape Communicator.
2
Enter the IP address of this
unit in the "Address" or
"Location" field.
Left-click in the corresponding field, and type the
IP address of this unit specified in step 5 on page
5, and press the enter key.
• Enter a dot (period) between each three digits.
• If the three digits begin with "0" or "00," skip "0"
input (s).
Enter the address in this field.
The Web screen for this unit appears.
Example: when the address is 192.168.1.2
3
Open "Single window system"
or "Multiple window system."
Left-click on "Single window system" or "Multiple
window system."
Use either "Single window system" or "Multiple
window system" referring to "What Can be Done
on the Web Screen" on pages 10 and 11.
Click here.
When "Multiple window system" is not found on
the screen, scroll the display downward.
Note
• If the Web screen of this unit is displayed
simultaneously on multiple PCs, the operation
speed will be decreased.
Continue
9
Advertisement
