Advertisement
Setting a PC (Continued)
4
Select "Proxies" from
"Advanced."
Left-click on "Advanced," and a menu is displayed
beneath. Then left-click on "Proxies."
Left-click here.
5
Select "Manual proxy
configuration."
Left-click on "Manual proxy configuration."
6
Select "View."
Left-click on "View."
8
Left-click here.
Left-click here.
7
Enter the IP address of this unit
in the "Exceptions" field.
Left-click in the "Exceptions" field, and type the IP
address of this unit specified in step 5 on page 5.
• Enter a dot (period) between each three digits.
• If the three digits begin with "0" or "00," skip "0"
input (s).
Example: when the address is
192.168.1.2
Enter the address in this field.
8
Select "OK."
Left-click on "OK."
Repeat this operation until the display in step 1 is
restored.
Advertisement
