Connecting The Unit To A Network - Barco PreCa 1280i Networking Manual

Connecting the Unit to a Network

Before connection, turn off the power to the equipment to be connected.
It is also requested that you consult the administrator of your network in
advance.
LWhen connecting to a LAN
Rear of the unit
10Base-T
to the
Ethernet
connector
PC
LWhen connecting to a PC without connecting to a LAN
Rear of the unit
10Base-T
Note on cables and hubs
Cables and hubs for the 100BASE speed can also be used.
Commercially available 10/
100BASE-TX (category 5)
cable (straight)
Commercially available 10/
100BASE-TX (category 5)
cable (straight)
Commercially available 10/
100BASE-TX (category 5)
cable (cross)
Turn off the
power.
Network
Hub
to the
Ethernet
connector
PC
3