Connecting To External Devices; Preparing For Transport - Epson TM-T88V-DT Technical Reference Manual

Connecting to External Devices

When connecting an external device to the interface unit, follow the procedures below.
When connecting an external device to a USB connector, be sure to check this
product and the device's manual for the amount of power consumed by the external
device.
CAUTION
1
Connect all the cables to the connectors on the back of the printer.
COM connector
USB connector
2
Connect the other cable connectors to the external devices.

Preparing for Transport

Follow the steps below to transport the product.
1
Turn off the product.
2
Remove the peripherals and the power connector.
3
Remove the roll paper.
4
Remove the customer display.
5
Pack the product upright.
160
Drawer kick-out connector
DC input connector
Line output
Ethernet 
connector
VGA connector