Built-In Safety Features - Power Cooker PC-WAL1 Owner's Manual

BUILT IN SAFETY FEATURES
01
LID SAFETY LOCK
02
PRESSURE/TEMPERATURE
SENSOR CONTROLS
03
BACK-UP SAFETY
RELEASE VALVE
04
CLOG RESISTANT
FEATURE
05
SPRING-LOADED SAFETY
PRESSURE RELEASE
06
TEMPERATURE
CUT-OFF DEVICE
6 | POWER COOKER™ | 6-QUART PRESSURE COOKER | MODEL PC-WAL1
This unit is equipped with a safety lock mechanism.
DO NOT attempt to open when pressurized.
Maintain even heat and pressure by automatically activating
or deactivating the power supply.
Should the Temperature/Pressure Sensor device malfunction,
causing pressure to build beyond maximum setting, the Back-Up
will automatically kick in and release the built up pressure.
Prevents food from blocking the steam release port.
Should all safety features listed above fail, this "spring-loaded"
device located beneath the heating element will automatically
lower the INNER POT, causing it to separate automatically from
the RUBBER GASKET ( page 8). This will enable the steam and
pressure to automatically escape around the pot LID, avoiding
a dangerous situation.
Should the unit malfunction and cause the internal temperature
to rise beyond the "Safe" limit, this device will cut-off the power
supply and will not automatically reset.