Digital Control Panel Overview - Power Cooker PC-WAL1 Owner's Manual

DIGITAL CONTROL PANEL OVERVIEW

The Power Cooker has up to eight basic cooking modes that may
be used alone or in combination to produce an infinite variety of

results. The Quick Start Guide supplied with this unit provides
Step-By-Step instructions.
When the unit is first plugged in, 0000 will appear on the
01
LED DISPLAY (A).
When a cooking process is selected, such as COOK (B), the
default time will blink 5 times. Then rotating double zeros may
02
appear on the left side of the LED DISPLAY (A) to signify it is
building pressure.
Once pressure is built, the zeros will stop rotating and begin
03
counting down the time.
The device will beep, the LED DISPLAY (A) will return to blank,
and then automatically enter KEEP WARM MODE once the
04
time has expired. It will remain in KEEP WARM MODE until
manually cancelled.
10 | POWER COOKER™ | 6-QUART PRESSURE COOKER | MODEL PC-WAL1
A
B
0000
C
F
D
E
G
H
I
J
K
COOK TIME BUTTON (I) - You can change the default time
05
when pressing the cook time button. It will change in 5 minute
increments.
DELAY TIME BUTTON (J) - Your meal will cook at a later time
06
from 30 minutes to 24 hours in 30-minute increments.
KEEP WARM/CANCEL BUTTON (K) — While the unit is in
a cooking cycle KEEP WARM/CANCEL will stop the cooking
07
cycle. When a cooking cycle runs its full course, the unit
automatically goes into the KEEP WARM MODE.
When the unit is in the KEEP WARM MODE, pressing the

KEEP WARM/CANCEL BUTTON (K) will cancel the KEEP
WARM operation.
Pressing the KEEP WARM/CANCEL BUTTON (K) when the

unit is in neutral (0000 on LED) mode will reset the unit to the
KEEP WARM MODE.