Table of Contents
Advertisement
TROUBLE SHOOTING
SYMPTOM
LID DOES NOT LOCK
CANNOT OPEN THE LID AFTER
ALL PRESSURE IS RELEASED
AIR ESCAPES FROM THE RIM
OF THE LID
AIR ESCAPES FROM THE FLOAT
VALVE DURING COOKING
THE FLOAT WILL NOT RISE
THE UNIT TURNS OFF
DISPLAY ERROR INDICATOR
INDICATOR CODE
E1
E3
E4
E5
POSSIBLE CAUSE
The sealing ring is not properly installed
The float valve is still up
No sealing ring was installed
Food residue is on the sealing ring
Sealing ring is damaged or worn out
Food is stuck on the sealing ring of the float valve
The sealing ring of the float valve is worn out
The pressure limit valve is not placed properly
Not enough food or water
Air escaping from the rim of the lid
& the pressure limit valve
The unit overheated
PROBLEMS/CAUSES
Pressure switch malfunction
Short circuit of sensor
Circuit open of sensor
Overheating
SOLUTION
Re-install the sealing ring
Press the float valve down
Install the sealing ring
Clean the sealing ring
Replace the sealing ring
Clean the sealing ring
Replace sealing ring
Adjust the pressure limit valve to "Close" position
Check recipe for proper quantities
Call our customer service center
Unplug & let the unit cool for 30 min to reset
POWER COOKER™ | 6-QUART PRESSURE COOKER | MODEL PC-WAL1 |
15
Hide quick links:
Advertisement
Table of Contents
