Preparation Before Operation; Auto Restart Function; Remote Controller - Mitsubishi Electric MSZ-A24NA Operating Instructions Manual

NAME OF EACH PART

Remote controller

Signal transmitting section
Operation display section
ON/OFF (operate/
stop) button
Open the front lid.
(This diagram shows an overall view.)
(This diagram shows an overall view.)
VANE button
(Horizontal vane button)
Operation select button
ECONO COOL button
WIDE VANE button
(Vertical vane button)
POWERFUL button
RESET button
4

PREPARATION BEFORE OPERATION

I
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, "Auto restart function" sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
I
Temperature buttons
NOTE
Use the remote controller
provided with the unit only.
Do not use other remote
controller.
Fan speed control button
Off-timer button
On-timer button
TIME set buttons
Forward button
Backward button
CLOCK set button

Auto restart function

These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Breaker for the air conditioner
Turn the breaker on.