Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for E-Collar Einstein ET-802TS
Summary of Contents for E-Collar Einstein ET-802TS
- Page 1 802TS / 1202TS Owner's Manual...
- Page 2 Einstein Remote Education Collar Thank you for purchasing the Einstein Remote Education Collar from E-Collar Technologies, Inc. We have made every attempt to provide you with the most technologically advanced product using the most stringent quality and manufacturing standards. We are confident you will be pleased with the results you will attain with the 802TS /1202TS Two Dog Remote.
- Page 3 CHARACTERISTICS • Range : 1 Mile • Momentary and Continuous stimulation supported • Tapping Sensation • Employs Ni-MH Rechargeable Batteries • Convenient Intensity Dial for Quick Adjustment • Stimulation Levels Adjustable from 0 to 100 • Collar Receiver Light for Night Tracking •...
-
Page 4: Contact Points
CONTENTS • • Transmitter 2 Collar Receivers with Strap and 5/8” Contact Points • • Battery Charger Owner’s Manual and splitter cable 802TS / 1202TS Owner's Manual • • Contact Points 3/4" Test Light • • Contact Point Tool Lanyard Einstein Owner's Manual 802TS / 1202TS... -
Page 5: Table Of Contents
Safety and General Information • Transmitter Parts • Collar Receiver Parts • Charging the Batteries • Turning Your E-Collar On/Off • The LCD Display Features • Button Functions • Changing the Intensity Level of Stimulation • Lock/Unlock the Stimulation Intensity Level •... -
Page 6: Safety And General Information
Hospital or Health Care Facility or enter the facility without turning off both units. An FCC license is not needed to operate Einstein E-Collar transmitters. However, any change or modification made to the transmitter, including the supplied antenna, without the expressed written approval of E-Collar Technologies, Inc. -
Page 7: Transmitter Parts
TRANSMITTER PARTS See figure on page 12 for button functions Antenna Stimulation Level Dial / Set and Lock Knob Indicator Light Stimulation Button (1D) (LED Window) LCD Display Stimulation Button (2D) Momentary / Continuous Button Mode Button Light and On/Off Button Battery Charging Receptacle and Rubber Cover Einstein Owner's Manual 802TS / 1202TS... -
Page 8: Collar Receiver Parts
COLLAR RECEIVER PARTS Collar Strap 5/8” Contact Points On/Off Button Indicator and Tracking Light (LED Window) THIS D-CLIP IS NOT TO BE USED AS A TIE OUT Battery Charging Receptacle and Rubber Cover Einstein Owner's Manual 802TS / 1202TS... -
Page 9: Charging The Batteries
Indicator Light will blink “Green” under normal operation. It will flicker “Red” when stimulation is applied and will blink “Red” when recharging is required. We recommend you fully charge your e-collar every six months when not in use to maintain battery life. - Page 10 CHARGING THE BATTERIES The indicator light will turn solid red during the 10 to 12 hour charge • cycle and stay red even though the unit is fully charged. Battery Care: • It is important to fully charge the batteries and fully discharge them for the first three uses.
-
Page 11: Turning Your E-Collar On/Off
TURNING YOUR E-COLLAR ON/OFF COLLAR RECEIVER ON/OFF BUTTON To turn the Collar Receiver On or Off : • Press the power button to turn collar receiver on/off. TRANSMITTER ON/OFF BUTTON To turn the Transmitter On or Off : • Press the “L” light button for more than 2 seconds. -
Page 12: The Lcd Display Features
THE LCD DISPLAY FEATURES Press down on the Stimulation Level Knob or press any button to wake up the LCD display. Please note that if the collar receiver is on, pressing the stimulation buttons and/or the mode button will trigger the collar receiver. Displays the Stimulation Level : “0”means no stimulation and “HI”... -
Page 13: Button Functions
BUTTON FUNCTIONS TRANSMITTER The 802TS / 1202TS transmitter is equipped with five control buttons, LCD display, and an adjustable dial. For long range use hold the transmitter up like the Statue of Liberty and never allow the antenna to touch anything as it will decrease the range. Power lines and foliage will also reduce the range. - Page 14 BUTTON FUNCTIONS Two programmable Modes are provided based on the status of M/C button when Mode button(M) is in 1D or 2D state. Two Stimulation buttons will be working differently. Mode Button “M” - Mode Button allows the user to change modes, cycling between 1D Mode to Tapping Sensation Mode, Tapping Sensation Mode to 2D Mode, 2D Mode to Tapping Sensation Mode, and Tapping Sensation mode to 1D Mode as shown in the diagram.
- Page 15 BUTTON FUNCTIONS - In 1D Mode, you can change the intensity level of 1D by rotating the dial and locking it. (See “LOCK/UNLOCK THE STIMULATION INTENSITY LEVEL” for details) The intensity level of 2D will be same as that of 1D unless it is locked.
- Page 16 BUTTON FUNCTIONS - In Tapping Sensation Mode, Sends a tapping sensation to the Dog 1 collar receiver. - If the current mode is 2D mode, the mode will be changed to 1D mode by pressing the Mode(M) Button 2 times or by stimulating Dog 1. - In 1D Mode, you can jump to 2D Mode by pressing the Mode(M) Button 2 times and vice versa.
- Page 17 Back to Factory Default Setting Your e-collar transmitter is a small computer, if you feel it is behaving badly, it probably needs to be reset. Please turn the stimulation to “0” and press both stimulation buttons and the mode button at the same time for 2 seconds.
-
Page 18: Changing The Intensity Level Of Stimulation
CHANGING THE INTENSITY LEVEL OF STIMULATION Rotating clockwise increases the stimulation level and conversely, rotating counter- clockwise lowers the stimulation level. It is highly recommended that the user practices changing levels and modes before putting the collar receiver on the dog. Setting the correct stimulation level for your dog is very important. - Page 19 CHANGING THE INTENSITY LEVEL OF STIMULATION USING THE E-COLLAR IN CONTINUOUS AND MOMENTARY MODES For example, if you want your dog to come to you and heel, you can hold the button down until your dog comes and heels or if jumping is an issue, you can hold the button down anytime their front paws are off the ground.
- Page 20 “e-collar training” or “remote dog training techniques”. Good Luck with your training! * CAUTION : Do not put the Einstein E-Collar receiver on a human being. * WARNING : E-Collar Technologies, Inc. is not responsible for any misuse of the Einstein E-Collar and loss and damages as a result of a dog bite.
-
Page 21: Lock/Unlock The Stimulation Intensity Level
LOCK/UNLOCK THE STIMULATION INTENSITY LEVEL How to Lock/Unlock the Stimulation Level This feature is useful when controlling two dogs simultaneously and you want to have different stimulation levels for each dog. In 1D Mode, you can see the 1D icon is blinking on the LCD display. Set the desired stimulation level and then push down on the top of the stimulation dial until you see “1D”... -
Page 22: Indicator Light
INDICATOR LIGHT • TRANSMITTER INDICATOR LIGHT Battery Charge level is signified by the flashing light going from “green” (ready for use) to “amber” (need to charge soon) and then to “red” (charge immediately). When any of the function buttons are pressed the indicator light will turn “red”... -
Page 23: Lost Transmitter Mode
Lost Transmitter Mode Your Einstein E-Collar transmitter allows the user to turn on a 6 hour timer. After 6 hours the transmitter will begin beeping providing the ability to locate the transmitter in tall grass. Lost transmitter mode is activated by first pressing light button and then simultaneously pressing the stimulation Button(1D) when the intensity level is zero. -
Page 24: Testing Your Einstein
Tapping Sensation and press the 1D stimulation button to test the tapping Mode sensation feature on the collar receiver for Dog 1 and repeat for Dog 2. Your Einstein E-Collar is ready to use. Einstein Owner's Manual 802TS / 1202TS... -
Page 25: Replacing The Contact Points
REPLACING THE CONTACT POINTS The standard 5/8” contact points are used for most dogs. Thicker fur breeds require the longer 3/4” contact points. Replace the 5/8” contact points by following the instructions below using the enclosed contact point tool. 1. Loosen both contact points by rotating the contact point counter-clockwise using the contact point tool. -
Page 26: Correctly Fitting The Collar
Antibiotic ointment will aid in the healing process. Some dog breeds have very thick fur that requires special contact points, please contact our customer service or visit www.ecollar.com for more information. -
Page 27: Warranty
The Limited Lifetime Warranty will expire 5 years from the date the model is discontinued by E-Collar Technologies, Inc. Any attempt by the user to repair or open the e-collar including battery replacement will void the warranty. Einstein Owner's Manual 802TS / 1202TS... -
Page 28: Accessories
ACCESSORIES • Micro-Probes Contact Points • Thick-Hair Contact Points • Car Adapter • Belt Clip Einstein Owner's Manual 802TS / 1202TS... -
Page 29: Contact Information
CONTACT INFORMATION E-Collar Technologies, Inc. 2120 Forrest Park Drive Garrett, IN 46738 Toll-Free 1-855-326-5527 Toll-Free Fax 1-855-226-5527 www.ecollar.com sales@ecollar.com Einstein Owner's Manual 802TS / 1202TS...
Need help?
Do you have a question about the Einstein ET-802TS and is the answer not in the manual?
Questions and answers