Installation - Sanyo EM-N202 Instruction Manual

INSTALLATION

Remove all packing material and accessories.
Examine the oven for any damage such as dents or a broken door
Do not install if oven is damaged.
1. Select a level surface that provides enough
outlet vents.
Leave a minimum clearance of 7.5 cm above the oven.
Do not remove the legs from the bottom of the oven to ensure
proper airflow.
Blocking the inlet and/or outlet opening can damage the oven.
Do not install oven over a range, cooktop or other heat-
producing appliance.
Place the oven as far away from radios and TV.% as possible.
Operation of microwave oven may cause interference to your
radio, TV. Plug the microwave oven into a different outlet.
When the cabinet is covered with a protective film, remove the
film to fully show the intended colour and finish.
I
When installing in a Built-in situation, you must aliowa minimum of 7.5cm
on each side and the top and at the back of the microwave oven for
ventilation. Failing to do so might cause damage to the microwave oven.
A minimum clearance of 7.5 cm is required between the oven and any
adjacent walls including the back wall.
CAUTION: Use with care when handling oven. The control panel side of oven
is heavy inside
open space for the inlet and/or
7.5
min.
.
cm