3. Attention of installation
3.1 Safety Precaution
■
To prevent injury to the user or other people and property damage, the following instructions must be
■
Incorrect operation due to ignoring instruction will cause harm or damage.
■Before service unit, be sure to read this service manual at first.
3.2 Warning
﹥Installation<
■
Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
There is risk of fire or electric shock.
■
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized service center.
Do not disassemble or repair the product, there is risk of fire or electric shock.
■
Always ground the product.
There is risk of fire or electric shock.
■
Install the panel and the cover of control box securely.
There is risk of fire of electric shock.
■
Always install a dedicated circuit and breaker.
Improper wiring or installation may cause fore or electric shock.
■
Use the correctly rated breaker of fuse.
There is risk of fire or electric shock.
■
Do not modify or extend the power cable.
There is risk of fire or electric shock.
■
Do not install, remove, or reinstall the unit by yourself (customer).
There is risk of fire, electric shock, explosion, or injury.
■
Be caution when unpacking and installing the product.
Sharp edges could cause injury, be especially careful of the case edges and the fins on the condenser and
evaporator.
■
For installation, always contact the dealer or an Authorized service center.
There is risk of fire, electric shock, explosion, or injury.
■
Do not install the product on a defective installation stand.
It may cause injury, accident, or damage to the product.
■
Be sure the installation area does not deteriorate with age.
If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal
injury.
■
Do not let the air conditioner run for a long time when the humidity is very high and a door or a windows is
left open.
Moisture may condense and wet or damage furniture.
■
Take care to ensure that power cable could not be pulled out or damaged during operation.
There is risk of fire or electric shock.
■
Do not place anything on the power cable.
There is risk of fire or electric shock.
■
Do not plug or unplug the power supply plug during operation.
There is risk of fire or electric shock.
■
Do not touch (operation) the product with wet hands.
There is risk of fire or electric shock.
■
Do not place a heater or other appliance near the power cable.
第 5 页 共 59 页
followed.