Miele CVA6805 Operating And Installation Instructions page 79

Problem
F73 or
Check the brew unit
F227, F228, F229, F230
F233
Frequently Asked Questions
Possible cause and solution
The brew unit cannot be positioned correctly, or it is
dirty and the coffee cannot be processed.
 Check whether you can remove the brew unit (see
"Cleaning and care - Brew unit").
 If you can remove the brew unit, clean it (see
"Cleaning and care – Brew unit").
 Push the coffee ejector of the brew unit into the
correct position (see image).
 Push the waste unit and the water tank back in the
machine. Do not insert the brew unit. Close the
door and switch the machine on with the On / Off
 button.
This will initialize the brew unit motor and put in back
into the start position.
 When
Insert the brew unit
open the door and put all the parts back in the
machine. Then close the door.
If the brew unit cannot be removed:
 Turn the machine off with the On / Off  button.
Wait for 2 minutes before turning it back on again.
There is a fault with the automatic dispenser adjust‐
ment.
 Confirm the message with
Automatic dispenser adjustment during drink prepa‐
ration is deactivated as long as the appliance remains
switched on. You can continue to prepare drinks.
appears in the display,
.
OK
79