Kenwood TK-2160 Service Manual page 6

TK-2160
Assembling
• Installation of battery terminal block and
packing
Install them so that no distortion or deformation occurs.
• Installation of speakers and cushion, and wire
styling of speakers
Wire Styling
Install the speakers so that they do not protrude from the
cushion. Perform the w ire styling of speakers as show n in a
photograph.
• Attaching the cushion
Attach the cushion as show n in Fig. 1.
G13-2017-04
C
G13-2020-04
A
B
Fig. 1
Note: Cushion must not cover the screw s A , B and C .
6
DISASSEM BLY FOR REPAIR
Install the cushion
acco r d i n g t o t h e
guide.
Take scr ew B an d
MIC edge as reference
line w hen sticking.
G13-2018-04
Stick betw een screw
A and B.
• Installation of chassis and cabinet assy
Do not press this area, top
packing easily deform .
First, m ount the set to the cabinet assy.
Second, press dow n the Chassis to the
cabinet assy as show n in the diagram .
Good Condition
After m ount, packing Packing deform .
sh o u l d b e i n t h i s
condition.
Packing protruded out.
Note:
• Take care that the packing does not protrude from the
chassis or case.
• Replace the protruded or deformed packing w ith a new one.
NG Condition