Check For Blockages; Bottom Of Floor Nozzle - Shark Rocket HV320ANZ Owner's Manual

MAINTENANCE

CHECK FOR BLOCKAGES

REMOVE AND INSPECT:
Make sure unit is off
and cord unplugged. 1 HANDHELD AND TUBE
a Remove the tube from the handheld portion and check all dust cup intake openings.
b Remove the floor nozzle from the tube and check the tube for blockages.
2

BOTTOM OF FLOOR NOZZLE

c Use a coin to unlock the three locks on the bottom of the floor nozzle.
d A portion of the base is removable to allow for better access to the brush roll and exposure to the airway. Shine a flashlight from the bottom to check for
possible blockage in the airway.
e Remove any string, carpet fibres or hair that may be wrapped around the brush roll. There is a groove on the brush bar that allows a pair of scissors to cut
across it to loosen up the debris.
f To reassemble, replace base by lining it up along the front of the nozzle. Push down to snap into place. Lock the three locks.
c
c
a
d
c
e
N Z : 0 8 0 0 0 0 2 9 9 9
b
b
f
11