Console Settings; Snmp Settings - D-Link DWL-3200AP User Manual

Using the Coniguration Menu
DWL-300AP User's Manual

Console Settings

Status: Status is Enabled by default. Uncheck the box to disable the
console.
Console Protocol: Select the type of protocol you would like to use, Telnet or SSH.
Timeout: Select the time out period.

SNMP Settings

Status: Status is Enabled by default. Uncheck the box to disable the SNMP
functions.
Public Community String: Enter the public SNMP community string.
Private Community String: Enter the private SNMP community string.
Trap Status: Check the box to enable the trap status.
Trap Server IP: Enter the trap server IP address. This is the IP address of the SNMP
manager to receive traps sent from the wireless access point.
Trap Type: You can specify what kind of trap type (System, Wireless) should
be sent to the trap server.
Ping Control Setting: Check the box to enable Ping control. Ping works by sending ICMP
"echo request" packets to the target host and listening for ICMP
echo response replies. By disabling the Ping control setting, the
AP will not respond to the ICMP echo request packets. Default is
set to enabled..
50
D-Link Systems, Inc.