Introduction - D-Link DWL-3200AP User Manual

DWL-300AP User's Manual

Introduction

At up to ifteen times the speed of previous wireless devices (maximum wireless signal rate of up
to 108Mbps* in Super G mode), you can work faster and more eficiently, increasing productivity.
With the DWL-300AP, bandwidth-intensive applications like graphics or multimedia will beneit
signiicantly because large iles are able to move across the network quickly.
The DWL-300AP is capable of operating in one of 3 different wireless networking modes; access
point, WDS (Wireless Distribution System) with AP, or WDS mode.
Use less wiring, enjoy increased lexibility, save time and money with PoE (Power over Ethernet).
With PoE, the DWL-300AP shares power and data over the CAT5 cable, making the setup of
your network less expensive and more convenient.
An ideal solution for quickly creating and extending a wireless local area network (WLAN) in ofices
or other workplaces, trade shows and special events, the DWL-300AP provides data transfers
at up to 108Mbps in Super G mode when used with other D-Link AirPremier products. (The
80.11g standard is backwards compatible with 80.11b devices.)
WPA is offered in two lavors: Enterprise (used for corporations) and Personal (used for home
users).
WPA-Personal and WPA2-Personal is directed at home users who do not have the server based
equipment required for user authentication. The method of authentication is similar to WEP because
you deine a "Pre-Shared Key" on the wireless router/AP. Once the pre-shared key is conirmed
and satisied on both the client and access point, then access is granted. The encryption method
used is referred to as the Temporal Key Integrity Protocol (TKIP), which offers per-packet dynamic
hashing. It also includes an integrity checking feature which ensures that the packets were not
tampered with during wireless transmission. WPA2-Personal is far superior to WPA-Personal,
because the encryption of data is upgraded with the Advanced Encryption Standard (AES).
*"Maximum wireless signal rate derived from IEEE Standard 80.11g speciications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network trafic, building materials and construction, and network overhead
lower actual data throughout rate."
D-Link Systems, Inc.
Introduction
4