Home - Advanced Settings - Performance - D-Link DWL-3200AP User Manual

DWL-300AP User's Manual
Home > Advanced Settings > Performance
Wireless Band:
Frequency:
Channel:
Data Rate*:
Beacon
Interval:
*"Maximum wireless signal rate based on IEEE Standard 80.11g speciications. Actual data throughput will vary. Network conditions
and environmental factors, including volume of network trafic, building materials and construction, and network overhead lower
actual data throughout rate."
D-Link Systems, Inc.
IEEE 80.11g.
The frequency relects the choice of the wireless channel. When
IEEE 80.11g is chosen the frequency is .437GHz for channel 6.
The default channel for IEEE 80.11g is 6.
The Data Rates are Auto 1Mbps, Mbps, 5.5Mbps, 11Mbps, 6Mbps,
9Mbps, 1Mbps, 18Mbps, 4Mbps, 36Mbps, 48Mbps, 54Mbps.
Beacons are packets sent by an access point to synchronize a
network. Specify a beacon interval value. The default (100) is
recommended.
(Delivery Traffic Indication Message) - Select a setting between 1 and
DTIM:
55. 1 is the default setting. DTIM is a countdown informing clients of
the next window for listening to broadcast and multicast messages.
Using the Coniguration Menu
7