D-Link DWL-3200AP Install Manual
Hide thumbs Also See for DWL-3200AP:

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DWL-3200AP

  • Page 2: System Requirements

    System Requirements DWL-3200AP Install Guide System Requirements: Minimum System Requirements: • CD-ROM Drive • Computers with Windows, Macintosh, or Linux-based operating systems • Installed Ethernet Adapter Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above Package Contents D-Link AirPremier...
  • Page 3: Installing The Hardware

    Installing the Hardware Connect one end of an Ethernet cable Step 1 (included with your package) to the LAN port on the DWL-3200AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE Step 2 base unit.
  • Page 4 The Setup Wizard DWL-3200AP Install Guide Open your Web browser and type http://192.168.0.50 into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type admin for the username and leave the password field blank.
  • Page 5 Click Next 802.11g networks please do the following: Step 2 - Set Wireless LAN Connection. By default the DWL-3200AP SSID is set to default with a Channel setting of 6. Click Next D-Link Systems, Inc.
  • Page 6 DWL-3200AP Install Guide 802.11g networks please continue as follows: Step 3 - Encryption The DWL-3200AP is capable of three levels of wireless encryption: 64-, 128-, 152-bit, using either Hexadecimal or ASCII key type. By default encryption is disabled. You can change the encryption settings for more secure wireless communication.
  • Page 7 DWL-3200AP Install Guide The Setup Wizard When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: D-Link Systems, Inc.
  • Page 8 Notes DWL-3200AP Install Guide D-Link Systems, Inc.

Table of Contents