Installing The Baffle - Heat & Glo VRT-BZ-N-AUB Owner's Manual

ON BACK OF APPLIANCE:
6. Remove the four screws from the cover plate on rear of
gas stove. Set cover plate aside. Retain screws. (See
Figure 9.8). Attach DV adapter collar in its place. Install
the inner extension collar.
INNER ExTENSION COLLAR
Figure 9.8
7. Install the cover plate with gasket to the top of gas stove with
screws previously removed (Figure 9.9).
Figure 9.9
42
ON TOP OF APPLIANCE:
8. Install the new back panel (without hole) to the rear of
9. Install the new top as shown in Figure 9.10.
Figure 9.10
F. Installing the Baffle
The baffle is shipped wrapped, inside the firebox. Install the
baffle with the embedded "T" side up, place it on top of the
brackets on the inside of the firebox, ensuring back edge of
baffle makes contact with the back of the firebox.
Figure 9.11
Heat & Glo • VRT-AUB • 2123-980_R14 • 12/14
gas stove. Replace the Allen head screws removed in
Step 3 to hold the back panel in place.