Panasonic FA-A355 User Manual page 19

(2) F6 mode Adjust and programming
Set the copier to service mode and press Multi-Copy key "6".
Press the Start key.
Select the desired code number with touch panel display and touch the OK key.
If you wish to select other code number, scroll the menu with arrow keys (
The display will indicate current seting.
Touch the Input key on the touch panel display and input the new setting number
with Multi Copy key.
Increase : Multi Copy key.
Decrease : Reset and Multi Copy key.
When the OK key is touched on the touch panel display, the setting is changed
and is now stored in memory.
When CANCEL key is touched, the desired code input will not be accepted.
Press the Clear and User Preset key to escape service mode.
Code
Item
No.
c91 ADF original lead
edge registration
c92 ADF original pick up
registration
c93 ADF Original trail
edge detection
c94 ADF magnification
ratio
5-4
Function
Adjustment of
original detection
timing
Adjustment for length of
the loop formed before
registration roller
Adjustment of original
trail edge detection
Adjustment of ratio
when the scan is made.
(+) : Enlargement
(-) : Reduction
Remarks
0.2mm
(-99 to +99)
0.4mm
(-99 to +99)
0.2mm
(-127 to +127)
0.10%
(-9 to +9)
).