Hamilton Beach TL-6-5A Instruction Manual page 7

4. Turn on the hot and cold water switches (#5 and #6 in Parts and Features
section).
5. Allow 1 hour for water to reach hot and cold temperatures.
WARNING! BURN HAZARD: The product heats water to a temperature of
approximately 95° C / 203° F. Water temperatures above 52° C / 125° F can
cause severe burns or death from scalding. Children, the disabled and the
elderly are at highest risk of being scalded. Children should be supervised
by an adult when using this product.
6. The hot water temperature is preset to 95° C / 203° F. The
hot water spigot is equipped with a child-resistant guard that
reduces the risk of hot water being dispensed accidentally or
by small children.
7. To dispense cold water, depress the cold water button
(#3 in Parts and Features section).
8. To dispenser hot water, slide the red child safety lock (#8 in
Parts and features section) to the side, then depress the hot
water button (#2 In Parts and Features section).
9. When the water bottle is empty, vertically pull it out by two
hands, and then replace it with another bottle.
Proper Care and Cleaning of Dispenser
• To maintain maximum efficiency and to prevent bacterial growth in the
water dispenser, we strongly recommend cleaning every 4 months.
Cleaning the Outside of the Dispenser
• Wipe the outside of the dispenser with a mild soap and water mixture.
Never use harsh chemicals or abrasive cleaners. Rinse thoroughly with
clean water and dry all surfaces.
• Do not immerse the dispenser in water.
6
2
1