Advertisement
HELI -
SCALE
Copyright ® 2011 - Reproductions interdites
www.heli-scale.fr
Positionner le tube de queue sur le fuselage principal, repérer et percer 3 autres trous dans le
fuselage principal. Puis installer les vis/ écrous. Nous recommandons d'installer des rondelles des 2
côtés (non fournies).
Offer the tail section up to the main fuselage section and transfer the location of the 3 holes over to the
main fuselage section. Drill the 3 holes for the 3 mm screws on the main fuselage.
Now glue the tail to the main fuse and use the 3 screws for further reinforcement. Photo shows the
installed screws.
Assemblage du train /
Landing Skid Assembly
Repérer les 4 arceaux du train. Attention ils ne sont pas tous de la même longueur. Les longs sont
pour l'arrière!!
Locate the 4 landing skid cross members. Also locate and assemble the landing gear
gluing jig supplied with the model.
The cross members are the same for both left and right side. The longer cross member
is for the rear and the shorter one for the front.
Advertisement
