Super Io Configuration - Nexcom NViS 5604-SERIES User Manual

Chapter 4: BIOS Setup

Super IO Configuration

This section is used to configure the serial ports.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Super IO Configuration
COM1 Configuration

COM2 Configuration

COM3 Configuration

COM4 Configuration

COM5 Configuration

COM6 Configuration

WDT Timeout Reset [Disabled]
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
COM1 to COM6 Configuration
Configures the parameters of COM1 to COM6.
WDT Timeout Reset
Enables or disables the Watchdog Timer timeout to reset the system.
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
ACPI Settings
This section is used to configure ACPI settings.
Set Parameters of COM1
←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto
for ACPI S3 power saving.
Check Ready Bit
Enables or disables Check Ready Bit.
ACPI HPET Table
Enables or disables ACPI HPET Table.
53
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Suspend to RAM [Auto]
Check Ready Bit [Enabled]
ACPI HPET Table [Enabled]
PS/2 Keyboard Power On [Disabled]
PCI Devices Power On [Disabled]
Wake From Onboard LAN 2 [Disabled]
RTC Alarm Power On [By OS]
USB Keyboard/Remote Power On [Disabled]
USB Mouse Power On [Disabled]
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
It is recommended to select auto
for ACPI S3 power saving.
←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
NViS 5604 Series User Manual