Nexcom NViS 5604-SERIES User Manual page 63

Chapter 4: BIOS Setup
Chipset Configuration
This section is used to configure the chipset features.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
VT-d Capability Supported
DRAM Frequency [Auto]
Primary Graphics Adapter
[Onboard]
VT-d [Disabled]
PCIE1 Link Speed [Auto]
Share Memory [Auto]
IGPU Multi-Monitor [Enabled]
Render Standby [Enabled]
Onboard HD Audio [Enabled]
Front Panel [Auto]
Onboard HDMI HD Audio [Enabled]
Onboard LAN1 [Enabled]
Onboard LAN2 [Enabled]
Restore on AC/Power Loss [Power Off]
SLP_SUS# Minimum Assertion Width [Disabled]
Primary IGFX Boot Display [VBIOS Default]
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
DRAM Frequency
Select Auto to automatically set DRAM frequency.
Primary Graphics Adapter
Selects which primary graphics adapter to boot the system.
VT-d
Enables or disables Intel VT-d technology.
®
PCIE1 Link Speed
Configures the PCIE1 link speed.
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
Share Memory
Configures the amount of memory shared to the onboard graphics.
IGPU Multi-Monitor
Enables or disables the onboard graphics.
Render Standby
If [Auto] is selected, the
motherboard will detect the Enables or disables render standby of onboard graphics.
memory module(s) inserted and
assign the appropriate frequency
automatically.
Onboard HD Audio
Enables or disables the onboard HD audio, setting auto will automatically
disable the onboard HD audio when an external sound card is installed.
Front Panel
Enables or disables the onboard HD audio front panel.
←→: Select Screen
Onboard HDMI HD Audio
↑↓: Select Item
Enables or disables the onboard HDMI HD audio.
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
Onboard LAN1 to LAN2
F9: Load UEFI Defaults
Enables or disables onboard LAN1 and LAN2.
F10: Save and Exit
ESC: Exit
Restore on AC/Power Loss
Power Off
Power On
SLP_SUS# Minimum Assertion Width
Selects a minimum assertion width of the SLP_SUS# signal.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
49
When power returns after an AC power failure, the
system's power is off. You must press the Power button
to power-on the system.
When power returns after an AC power failure, the
system will automatically power-on.
NViS 5604 Series User Manual