Page 5
50 flights. If the main drive gear is loose, you should replace the one-way bearing. 3. Drive belt: SJMRC/RC-TEK uses only top quality, stretch-resistant belts. It is however, impossible to prevent the belt from stretching or wearing out.
Page 7
8. The operator of this helicopter is ultimately responsible for his/her own actions and any/all potential damaged caused either directly or indirectly as a result of such operation. RC-TEK Ltd., its agents and/or subsidiaries shall be held harmless for any financial, physical, or emotional loss caused by the operation of this helicopter.
Page 8
Main shaft fixing ring MT8013 Swash plate Fixing board set FG/CF8003 Fixing board Up servo mount FG/CF8002 Down servo mount BR8005 Bearing 4×8×H4mm SC8004 Cap screw M2×10mm SC8003 Cap screw M2×8mm SC8005 Cap screw M2×16mm SC8002 Cap screw M2×5mm NU8001 RC-TEK MT8023 Underlay...
Page 9
M0.4 T12 MT8034 FG8008 Main blade PS8005 Tail servo rod servo linkage ball set MT8040 Cap wrench 1.5mm Tools and MT8039 Cap wrench 1.3mm spare parts MT8038 Cap wrench 0.9mm RC-TEK NOTE: FG/CF depends on the version of the SJM180(215) kit.
Need help?
Do you have a question about the SJM180-C PRO and is the answer not in the manual?
Questions and answers