RC-Tek RCT-80AGL Instruction Manual

Brushless esc

Advertisement

Quick Links

RCT-80AGL BRUSHLESS ESC INSTRUCTION MANUAL
Thank you for purchasing the RCT-80AGL ESC. Please read this manual completely before using
this device.
1. PRODUCT INTRODUCTION – The RCT-80AGL offers:
A. Advanced design logic incorporating the latest high quality components.
B. Low impedance and robust 2mm stacked PCB construction for aggressive use.
E. Effective temperature compensation and protection capabilities.
F. Accurate over-voltage and low-voltage protection functions.
G. Super soft startup and superior timing capabilities.

2. SPECIFICATIONS

RCT-80AGL
Rated Continuous Current: 80A
Maximum Current: 90A (no more than 15 seconds)

3. FUNCTIONS

A. Safe start-up mode: when the ESC receives power, the throttle stick of the transmitter is
momentary disabled.
B. Low-voltage protection: when the input voltage is less than the programmed value, the ESC will
decrease the power input automatically in order to protect the power system.
C. Over-voltage protection: when input voltage is more than the programmed value, the ESC will
signal an alarm and then automatically deactivate; protecting the device from potential damage.
D. Over-heat protection: when the temperature reaches an unsafe level, the ESC will automatically
deactivate; protecting the device from potential damage.
E. Battery type option: there are two battery type options supported.
F. Start-up mode: there are three startup modes which can be used for all types of model aircrafts.
G. Transmitter compatibility: the ESC is compatible with all known brands of transmitters.
H. Safety: under normal operation, if the ESC loses the signal from the transmitter/receiver, the
ESC will decrease operation automatically and reset.
1
RC-TEK
RCT-80AGL ESC INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RCT-80AGL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RC-Tek RCT-80AGL

  • Page 1 RC-TEK RCT-80AGL ESC INSTRUCTION MANUAL RCT-80AGL BRUSHLESS ESC INSTRUCTION MANUAL Thank you for purchasing the RCT-80AGL ESC. Please read this manual completely before using this device. 1. PRODUCT INTRODUCTION – The RCT-80AGL offers: A. Advanced design logic incorporating the latest high quality components.
  • Page 2 RC-TEK RCT-80AGL ESC INSTRUCTION MANUAL 4. THROTTLE SETTING INSTRUCTIONS: Throttle setting is ONLY applicable when using the ESC for the first time or using the ESC to match a new transmitter A. Turn on transmitter, move the throttle stick to the top point, switch on ESC power.
  • Page 3 RC-TEK RCT-80AGL ESC INSTRUCTION MANUAL B. CHOOSING A PROGAM MENU ITEM CAUTION: When entering the program mode, the brushless motor will utter some tones circularly. When you hear these tones, move the throttle stick of transmitter to the low point within 2 seconds and enter the setting item, or brushless motor will utter next setting item tones.
  • Page 4 RC-TEK RCT-80AGL ESC INSTRUCTION MANUAL 7. Function/Tone Setting Diagram: TONES DI-DI DI-DI-DI SETTING ITEM Brake setting ▲OFF Inefficacy ▲Lithium NiMH/NiCd Battery type setting Inefficacy battery battery Low-voltage protection mode ▲Decrease power Turn off power Inefficacy setting output Low-voltage protection ▲middle...
  • Page 5 RC-TEK RCT-80AGL ESC INSTRUCTION MANUAL LOW-VOLTAGE PROTECTION VOLTAGE VALUE SETTING When you set up the ESC using a Lithium battery, the ESC will identify the size of the battery automatically. LOW: the cutoff voltage of the battery is 2.6V MIDDLE: the cutoff voltage of the battery is 2.8V HIGH: the cutoff voltage of the battery is 3.0V...

Table of Contents