Advertisement

Quick Links

RC-TEK Ltd. SKYSHARK 450 REFERENCE MANUAL
Copyright © 2007 RC-TEK, All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SKYSHARK 450 and is the answer not in the manual?

Questions and answers

Summary of Contents for RC-Tek SKYSHARK 450

  • Page 1 RC-TEK Ltd. SKYSHARK 450 REFERENCE MANUAL Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 2: Frame Assembly

    Parts Required Frame A x 2 Screw 7mm x 2 Canopy Mount x 2 Boom Clamp x 1 Standoff x 1 Screw 27mm x 3 M3 Nut x 3 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 3 Threadlock all screws per notes on the left Frame B x 2 Tail Gear x 1 Bearing Block x 1 Bearing Block x 1 Gear x 1 Screw 7mm x 6 Screw 15mm x 8 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 4 Spacer x 4 Battery Plate x 1 Threadlock all screws per notes on the left Bearing 10.5x5 x 2 Bearing Block x 2 Metal Plate x 1 Screw 7mm x 16 Screw 15mm x 4 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 5 Carbon plate x 1 Swash restraint x 1 Screw Cap x 14 Spacer x 8 Skid leg x 2 Skid pipe cap x 4 Skid pipe x 2 Screw 7mm x 6 Screw 4mm x 3 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 6 Threadlock all screws on this page Tail Belt x 1 Tail Gear x 1 Tail pulley x 1 Bearing x 2 Tail shaft x 1 Screw 7mm x 2 Screw 15mm x 6 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 7: Tail Pitch Slider

    Tail Hub x 1 Pitch Slider x 1 Ball link x 1 Screw 7mm x 1 Link arm x 2 Washer x 1 Bearing 5x2x2.5 x2Screw 7mm x 2 Screw 10mm x 1 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 8 Screw 7mm x 2 Blade holder x 2 Bearing 6x2x2 x 2 Washer thick x 2 Screw 10mm x 1 Tail blade x 2 Ball link x 2 Bearing 5x2x2 x 2 Screw 11mm x 2 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 9 Parts Required Horizontal fin x 1 Screw Cap x 4 Servo mount x 2 Fin Mount x 1 Control rod x 1 Vertical fin x 1 Screw 7mm x 4 Screw 9mm x 2 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 10 3 quarters of the way. Parts Required Boom Stay x 2 Screw 9mm x 2 Screw 13mm x 2 Screw cap x 2 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 11 Screw 7mm x 4 washout arm x 2 Main Shaft x 1 Blade hub x 1 Screw 12mm x 1 Nut x 1 Carrier centre x 1 Washer x 2 Screw 6mm x 2 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 12 Screw 5mm x 4 Frame B x 2 Grub Screw x 2 Screw 5mm x 4 Flybar x 1 Screw 7mm x 1 Head Button x 1 Flybar loop x 2 Flybar link x 2 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 13 O-Ring x 4 Screw x 8 Bearing 6mm x 2 Screw 7mm x 2 Ball link x 2 Spacer x 2 Blade Holder x 2 Bearing 8mm x 6 Washer thin x 2 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 14: Washout Assembly

    Screw 7mm x 2 Washout arm x 2 Washout link x 2 Washer thin x 4 Bearing 5x2x2 x 4 Washer thick x 4 Ball Link x 2 Screw 7mm x 2 Washout hub x 1 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 15: Swashplate Assembly

    3 links to add in this section 2 long 1 small. There lengths are as per the dimensions on the right. Parts Required Collar x 1 Swashplate x 1 Grub screw x 1 Screw 7mm x 6 Ball link x 6 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 16 Parts Required Nut x 1 One way x 1 Spacer x 1 Ball link long x 1 Screw 14mm x 1 Screw 13mm x 1 Main Gear x 1 Lower Gear x 1 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 17: Main Blades

    The main blades should be tight in the blade holders but should be moveable when a small amount of force is apllied. Parts Required Main Blade x 2 Screw 19mm x 2 Nylock Nut x 2 Copyright © 2007 RC-TEK, All Rights Reserved...
  • Page 18 POWERED BY 3-DAZ Copyright © 2007 RC-TEK, All Rights Reserved...

Table of Contents