Deleting Codes; Clock Setting; Volume Set - Steren RM-12 User Manual

Do not press different button as mentioned in this user's Do not press different button as mentioned in this user's
manual. manual.
You have 30 seconds as a maximum time to press a button You have 30 seconds as a maximum time to press a button
in each programming step, otherwise, you will leave the in each programming step, otherwise, you will leave the
Search Method and must repeat from step 2. Search Method and must repeat from step 2.

DELETING CODES

If you want to delete a code from a specifi c device, use any of
the programming methods, the new code will replace the old
one.

CLOCK SETTING

1.- Press SET for 3 seconds, CODE SETUP is displayed in the
screen.
2.- Use the multi-control button to choose CLOCK SET OPTION.
3.- Press SELECT to confi gure the clock.
4.- The hour blinks.
5.- With the multi-control button, move Up or Down to set the
correct time.
6.- Press SELECT to set the minutes, again use the multi-control
button.
7.- Press SELECT, and now you can set the current day.
8.- To set the day, use the multi-control button.
9.- Press SELECT to store the changes in memory. In the screen
you will see the message SUCCESS.

VOLUME SET

If one of your devices includes a volume control, and you don't
want to activate using the remote controller, follow these steps:
1.- Press and hold SET for 3 seconds, CODE SETUP is dis-
played in the screen.
2.- Use multi-control button to choose VOLUME SET option.
Then press the SELECT button.
3.- Select the device you want to block the volume. In the screen
you will see the selected device.
4.- With the multi-control button move Up or Down to select VOL
LOCK option.
5.- press SELECT to store the changes in memory. In the screen
you will see the message SUCCESS.
If you want to unlock the volume, repeat steps 1 to 3 and If you want to unlock the volume, repeat steps 1 to 3 and
choose the VOL UNLOCK option. choose the VOL UNLOCK option.
ENGLISH-4