Search Codes Manually - Steren RM-090 Instruction Manual

B. Search codes manually
5. Press the "On" button repeatedly until it shut
down equipment that you are pointing / lights.
Then press the button (e.g.: "TV1"), which you
had pressed in step 2.
6. Turn on the device that you just turn off. Confirm that your remote control buttons work
normally. If the buttons do not function correctly, repeat the steps 2 through 5, until you find
the code that fits your device.
8 8
1. Turn on the device that you want to control
(TV, DVD, recorder) manually. Point the remote
control at the device's receiver.
2. Press and hold the "SET" button and then
press the button corresponding to the equipment
to be controlled. E.g.: Press the "SET" button
and the "TV1" to program this button.
3. When the LED turns on, release the "SET"
and the "TV1" buttons (in the event that you
want to configure this button) at the same time.
4. Press and release the "SET" button again.
The LED indicator will start flashing.