Table of Contents
Advertisement
3. Connector Instruction
The Cable and connector are as below. Connect power adaptor first,
then connect the IP Camera to PC or network, and set up the network
configurations according to the network environment. About I/O setting,
please refer to chapter VII in User Manual:
4. PoE ( Power Over Ethernet)(Optional)
Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to the network
device, such as an IP phone or a network camera, using the same cable as
that used for network connection. It eliminates the need for power outlets at
the camera locations and enables easier application of uninterruptible power
supplies (UPS) to ensure 24 hours a day, 7 days a week operation.
"I/O
Configuration" for detail.
802.3af PoE Switch is recommended
Advertisement
Table of Contents
