Table of Contents
Advertisement
7. IP Installer will search for all IP Cameras connected on Lan. Click "Search
Device" to refresh the result list.
8. Click one of the IP Camera listed on the left side. The network configuration of
this IP camera shows on the right side. You may change the "name" of the IP
Camera as your preference (eg: Office, warehouse). Change the parameter
and click "Submit" . It will apply the change and reboot the Device.
9. Please make sure that the IP address of your PC and IP Camera are on the
same subnet.
The same Subnet:
IP CAM IP address: 192.168.1.200
PC IP address: 192.168.1.100
Different Subnets:
IP CAM IP address: 192.168.2.200
PC IP address: 192.168.1.100
To Change PC IP address:
Control Panel→Network Connections→ Local Area Connection Properties→
Internet Protocol (TCP/IP) → Properties
10. A quick way to access remote monitoring is to double-click the selected IP
Camera listed on "Device list" of IP Installer. An IE browser will be opened.
Advertisement
Table of Contents
