Table of Contents
Advertisement
c. Access List
You can deny an IP address or a range of IP address so that they
cannot access the IP camera. Tick the "enable" box, key in the IP address
you want to deny, select"deny" then click"Add" to add it to the list.
You can also choose to deny a range of IP address but allow one or
several IP address of them. Take the picture above for example, IP address
192.168.50.151~161 are not allowed to connect to the camera, but only
192.168.50.159 can access. Note: In the list "allow" condition must be
ranked before "deny" condition. For example, if we exchange the sequence,
set "Deny: 192.168.50.151~192.168.50.161" for the first item and "Allow:
192.168.50.159" for the second item in the list, the IP "192.168.50.159"
turns out to be denied by the camera because the "deny" condition has the
priority according to our ranking way.
As for those IP addresses not included in the list, the default is "allow".
Advertisement
Table of Contents
