Electrical Specifications - Sharp 66GF-64H Service Manual

Hide thumbs

Table of Contents

•Power Input ...................... 220V-240 Volts AC 50Hz

•Power Consumption

Normal Operation ..................................105W

Stand-by Operation ...................................1W

•Audio Power Output Rating (MPO) / Impedance

Internal Left Speaker ........................ 10W, 7

Internal Right Speaker ..................... 10W, 7

Internal Centre Speaker ............... 10W, 7

External Front ....................... 20W + 20W, 8

Internal Sub-Woofer ......................... 20W, 4

Surround Speakers ................. 7W + 7W, 16

•Speakers

Left / Right ....................................... 6 x 12cm

Centre .............................................. 6 x 12cm

•White Level

Set brightness control to get total picture tube cathode current of 600 milliammeter under no signal

condition. Maximum necessary correction of each picture tube cathode current to get 8900 de-

grees K-20 MPCD screen temperature should not exceed 15% of its original value.

X=0.290

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug

and power receptacle, when servicing this chassis.

To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to

qualified service personnel.

This TV set contains a DOLBY PRO LOGIC SURROUND DECODER.

Manufactured under license from Dolby Laboratories.

"Dolby", the double-D symbol and "Pro Logic" are trademarks of Dolby Laboratories.