Electrical Specifications - Sharp 32LW-92H Service Manual

Pal i system colour television

Hide thumbs Also See for 32LW-92H:

Operation manual (36 pages)

Operation manual (37 pages)

Table of Contents

•Power Input .................... 220V-240 Volts AC 50 Hz

•Power Consumption

Normal Operation (Method IEC60107) ............... 90 W

Stand-by Operation .......................................... < 4 W

•Audio Power Output Rating (MPO) / Impedance

Internal Left Speaker ................................. 10 W, 8

Internal Right Speaker ............................... 10 W, 8

•Speakers

2 ways speaker elliptic (2 pcs) ............ 42 x 180 mm

Tweeter (2 pcs) ................................................... 27mm

•Convergence (Maximum Misconvergence)

•White Level

Apply the rated voltage at the rated frequency to the TV set, while it is receiving full white pattern RF signal of 60

dB/µV from its RF input via the pattern generator.

Turn all picture controls to maximum value. Measure the colour temperatures at the center of the screen by

using the colour analyzer.

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug

and power receptacle, when servicing this chassis.

To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to

qualified service personnel.