Battery - rainforest EMU User Manual

EMU™
User Manual
this digit. The next digit to the left will then be flashing. Repeat the process until all five
digits show the desired values. After the last digit is saved, your EMU™ will go to the
Battery screen.
The Green Indicator LED Light will flash once every 60 seconds, and the Rate Label will
read "Set by User", while the manually set price is in effect. Note that using the Set
Rate screen to change the current price will have no effect if a current price value is set
by the smart meter.

Battery

The Battery screen indicates the charge level
Battery
of the batteries. Four bars indicates the
batteries have a good charge. Fewer bars
indicate the battery charge is reduced. The
batteries should be replaced if the Battery
screen shows only one bar.
www.rainforestautomation.com
18