Table of Contents
Advertisement
Quick Links
HD5FEVD-8012
HD SDI 1080P ICR 360° Fisheye
FEATURES
•
SDI 1080P - 1920 x 1080
•
SDI / 4 Channel CVBS Output
•
1/3.2" Color CMOS QSXGA 5 Megapixel
•
1.19mm Megapixel Lens
•
12V DC, 550mA max.
•
IP66 Rating
Please read the Manual before attempting to use this product.
Copyright © 2014. All Rights Reserved.
Vandal Dome Camera
USER MANUAL
Specifications and appearance are subject to change without notice.
HDC-40
R201402-V19
Advertisement
Table of Contents
Related Manuals for Okina USA HD5FEVD-8012
Summary of Contents for Okina USA HD5FEVD-8012
-
Page 1: User Manual
HD5FEVD-8012 HD SDI 1080P ICR 360° Fisheye Vandal Dome Camera USER MANUAL FEATURES • SDI 1080P - 1920 x 1080 • SDI / 4 Channel CVBS Output • 1/3.2” Color CMOS QSXGA 5 Megapixel • 1.19mm Megapixel Lens • 12V DC, 550mA max. -
Page 2: Limited Warranty
When the video product exhibits a distinct change in performance. LIMITED WARRANTY OKINA USA products are covered under warranty for one (1) year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1. -
Page 3: Package Contents
PACKAGE CONTENTS One (1) HD5FEVD-8012 Camera with I/O connection cables Three (3) Wall Mounting Screws Three (3) Wall Anchors One (1) Allen Wrench One (1) User Manual * For any returns, please include all components listed above with original packaging in Resalable Condition. - Page 4 I/O CONNECTION Label1 Camera 1 CVBS(BNC) output Label2 Camera 2 CVBS(BNC) output Label3 Camera 3 CVBS(BNC) output Label4 Camera 4 CVBS(BNC) output RS485 cable Purple + / white - Power cable DC12V SDI cable SDI connector output (BNC gold color) External IR Cut Trigger White + / Brown - (3.3V)
- Page 5 RS485 CONNECTION The 360∘camera is set in protocol PELCO-D and baud rate 9600. User can use keyboard, DVR or any RS485 device to control 360∘camera. Ex, keyboard RS485 port RS485 cable Purple + Positive RS485 port 1 White - Negative RJ11 Pin 3+, Pin - How to setup connection between keyboard and camera Press MENU button of keyboard for function setup...
- Page 6 ACCESS TO THE CAMERA MENU Call preset 95: displays the menu of the 360° camera Use keypad to select item. Up/down for item chooses, to right enter to sub item. Call preset 94: will apply immediately the selected mode when user is inside the camera OSD RS485 CONNECTION WITH DVR RS485 port RS485 +...
-
Page 7: Osd Operation
OSD OPERATION Main Menu Structure Item Selection Description Submenu Auto exposure Submenu Auto white balance setting BRIGHTNESS 1 ~ 9 Picture brightness adjust SATURATION 1 ~ 9 Picture saturation adjust Submenu Motion detection setting MASK Submenu Picture mask zone setting OFF/MIDDLE/HIGH Wide dynamic range NOISE REDUCTION... - Page 8 PATTERN Submenu PATTERN MODE1 Camera 1+360∘ MODE2 Camera 2+360∘ MODE3 Camera 3+360∘ MODE4 Camera 4+360∘ MODE5 Quad+360∘ MODE6 Camera 1+Camera 3+360∘ MODE7 See below for more details MODE8 180° in 16 :9 Display MODE9 360° Flat MODE10 180∘+Camera 3+Camera 4 MODE11 180∘+ 180∘...
-
Page 9: Command List
COMMAND LIST For camera 1 to 4 it is possible to define 3 preset points that will be used for the preset cruise (76) and the preset sequence display (66). To define preset 1 on camera 1 Call camera 1 Select your preset view by adjusting with the joystick Press 1 then press PRESET button 3 sec until you hear a bip (OSD will display on screen POINT1) (Setting may differ from the type of RS485 device you are using) - Page 10 MODE 4 MODE 5 MODE 6 MODE 7 MODE 8 MODE 9 MODE 10...
- Page 11 MODE 11 MODE 12 MODE 13 ANALOG 4 VIDEO OUTPUT Mode Analog Video Mode Analog Video Yes. Only cam 1. Yes. Cam 1, 2, 3, 4. Not Recommended. Recommended. Yes. Only cam 2. Yes. Only cam 1 & 3. Not Recommended. Not Recommended.
-
Page 12: Specifications
SPECIFICATIONS Model HD5FEVD-8012 Image Sensor 1/3.2” Color CMOS QSXGA (5 Megapixel : 2592x1944) image sensor Synchronizing Internal Scanning System 2:1 Interlace S/N Ratio More than 51dB Electronic Shutter X3; X2; X1; AUTO; 1/100; 1/120; 1/250 White Balance Auto OFF/Middle/ High Diagonal 185°...