ZyXEL Communications Armor Z1 NBG6816 User Manual page 23

Figure 10 Wireless Network
The following table describes the labels in this screen.
Table 7 Wireless Network
LABEL DESCRIPTION
Wireless Name Enter a descriptive name for the wireless LAN.
(SSID)
Note: The setting here applies to 2.4 GHz wireless radios.
If you change this field on the ARMOR Z1, make sure all wireless stations use the same
SSID in order to access the network.
Wireless Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless
Password connection by configuring WPA in the wireless LAN screens.
(WPA2)
Edit 5 GHz Select this check box to configure different SSID and wireless security settings for the
wireless ARMOR Z1's 5 GHz wireless network.
network
If you do not select this option, the ARMOR Z1 uses the same SSID and Wi-Fi key (you
configue above) for the 5 GHZ wireless network.
5GHz Wireless Enter a descriptive name for the wireless LAN.
Name (SSID)
If you change this field on the ARMOR Z1, make sure all wireless stations use the same
SSID in order to access the network.
5GHz Wireless Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless
Password connection by configuring WPA in the wireless LAN screens.
(WPA2)
Click the Apply button in the third part to save your settings.
Chapter 3 eaZy 123 Wizard
ARMOR Z1 User's Guide
23