System Settings; Illumination Settings - Pioneer FH-X775BT Owner's Manual

*3 Not available when [OFF] is selected in [SUB.W].

SYSTEM settings

You can also access to these menus when the unit is turned off.
Menu Item
CLOCK SET
12H/24H
[12H], [24H]
INFO DISPLAY
AUTO PI
[ON], [OFF]
AUX
[ON], [OFF]
MUTE MODE
[MUTE], [20dB ATT], [10dB ATT]
BT AUDIO
[ON], [OFF]
PANDORA
[ON], [OFF]
BT MEM CLEAR
[YES], [CANCEL]
Description
Set the clock (page 5).
Select the time notation.
Display the item on the sub information display.
Select from "SPEANA, " "LEVEL METER, " "SOURCE,"
"CLOCK, " and "OFF. "
Search for a different station with the same
programming, even if using a preset station.
Set to [ON] when using an auxiliary device
connected to the unit.
Mute or attenuate sound automatically when a
signal from equipment with a mute function is
received.
Set the Bluetooth signal on/off.
Set to [ON] when using the Pandora function.
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
Menu Item
BT VERSION
APP CONN. SET*1
[WIRED], [BLUETOOTH]
S.REMOTE*2
[OFF], [PIONEER], [PRESET]
*1 Not available when [PANDORA] or [APP] is selected as the source.
*2 Depending on your car, this function may not work properly. In this case, contact your dealer or an
authorized PIONEER Service Station.

ILLUMINATION settings

Menu Item
COLOR
[KEY COLOR], [DISP COLOR],
[BOTH COLOR]
DIM SETTING
[SYNC ILLUMI], [SYNC CLOCK],
[MANUAL]
Description
Displays the system version of the unit and the
Bluetooth module.
Select the appropriate connection method
according to your device.
Select [PIONEER] or [PRESET] according to your
wired remote control.
Description
Select color for the keys/display of the unit from
12 preset colors, [SCAN] or [CUSTOM]*.
• [SCAN]: Cycle through a variety of colors
automatically.
• [CUSTOM]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOR] and [DISP COLOR].
Change the display brightness.
15
En