Acpi Configuration - ASROCK N68-GE3 UC User Manual

This Manual: http://www.manuallib.com/file/2588018
3.4.3 3.4.3

ACPI Configuration

ACPI Configuration
3.4.3 3.4.3 3.4.3 ACPI Configuration ACPI Configuration ACPI Configuration
BIOS SETUP UTILITY
Advanced
ACPI Settings
[Auto]
Suspend To RAM
[Enabled]
Check Ready Bit
Away Mode Support [Disabled]
Restore on AC / Power Loss [Power Off]
[Disabled]
Ring-In Power On
PCI Devices Power On [Disabled]
PS / 2 Keyboard Power On [Disabled]
RTC Alarm Power On [Disabled]
ACPI HPET Table [Disabled]
OSC Control [Auto]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Suspend to RAM
Use this item to select whether to auto-detect or disable the Suspend-to-RAM
feature. Select [Auto] will enable this feature if the OS supports it.
Check Ready Bit
Use this item to enable or disable the feature Check Ready Bit.
Away Mode Support
Use this item to enable or disable Away Mode support under Windows
Media Center OS. The default value is [Disabled].
Restore on AC/Power Loss
This allows you to set the power state after an unexpected AC/power
loss. If [Power Off] is selected, the AC/power remains off when the
power recovers. If [Power On] is selected, the AC/power resumes
and the system starts to boot up when the power recovers.
Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.
Select auto-detect or
disable the STR
feature.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
4 5 4 5 4 5 4 5 4 5
XP
®