Table of Contents
Advertisement
This Manual: http://www.manuallib.com/file/2588018
USB 2.0 Headers
USB_PWR
(9-pin USB8_9)
(see p.11 No. 17)
1
USB_PWR
USB_PWR
(9-pin USB6_7)
(see p.11 No. 18)
1
USB_PWR
USB_PWR
(9-pin USB4_5)
(see p.11 No. 19)
1
USB_PWR
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.11 No. 27)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.11, No. 28)
1
1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don't
need to connect them for AC'97 audio panel.
Besides four default USB 2.0
P-9
P+9
ports on the I/O panel, there are
GND
DUMMY
three USB 2.0 headers on this
motherboard. Each USB 2.0
GND
P+8
header can support two USB
P-8
2.0 ports.
P-7
P+7
GND
DUMMY
GND
P+6
P-6
P-5
P+5
GND
DUMMY
GND
P+4
P-4
This connector allows you
to receive stereo audio input
CD1
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for the front
GND
PRESENCE#
MIC_RET
panel audio cable that allows
OUT_RET
convenient connection and
control of audio devices.
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
2 3
2 3
2 3
2 3
2 3
Advertisement
Table of Contents
