ASROCK N68-GE3 UC User Manual page 36

This Manual: http://www.manuallib.com/file/2588018
3.3 3.3 OC T OC T weak weak er Screen er Screen
3.3 3.3 OC T 3.3 OC T OC Tweak weak weaker Screen er Screen er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Boot Failure Guard Count
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
ASRock UCC
CPU Active Core Control
Processor Maximum Frequency
North Bridge Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
HT Bus Speed
HT Bus Width
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
CPU/LDT Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
BIOS SETUP UTILITY
H/W Monitor Boot Security Exit
Overclocking may cause
damage to your CPU and
[Auto]
motherboard.
[200]
It should be done at
[100]
your own risk and
[Enabled]
expense.
[3]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled] Select Screen
Select Item
x15.0 3000 MHZ
Enter Go to Sub Screen
x10.0 2000 MHZ
1.4250 V F1 General Help
F9 Load Defaults
[Auto]
F10 Save and Exit
[Auto]
ESC Exit
[Auto]
3 5 3 5 3 5 3 5 3 5