Installation Instructions; Safety Instructions For The Installer - AEG COMPETENCE B3000-1 User Instructions

Installation Instructions

Installation Instructions
Important: The new appliance is only to be installed and connected up
1
by an approved installer.
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
1

Safety Instructions for the Installer

• A device must be provided in the electrical installation which allows
the appliance to be disconnected from the mains at all poles with a
contact opening width of at least 3mm.
Suitable isolation devices are e.g. circuit breakers, fuses (screw-type
fuses are to be removed from the holder), earth leakage trips and
contactors.
• Anti-shock protection must be guaranteed by the installation.
• The unit in which the appliance is fitted must satisfy the require-
ments of DIN 68930 in respect of stability.
• Built-in ovens and cooking surfaces are fitted with special connector
systems. They may only be combined with appliances with a matching
system.
• Electrical connecting box must be in cabinet below oven, or on either
side of oven cabinet.
39