Marantz ST7001 User Manual page 25

OTHER OPERATION
Use the TUNING/PRESET knob !4 or pressing the
CHANNEL/CONTROL button ⁄4 to select the last day.
Then press the TUNING/PRESET knob !4 or
ENTER button v.
10.
Set the On time.
q Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
hour for the On time and press the TUNING/PRESET
knob !4 or ENTER button v.
w Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
minutes for the On time and press the
TUNING/PRESET knob !4 or ENTER button v.
11.
Set the Off time.
q Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
hour for the Off
TUNING/PRESET knob !4 or ENTER button v.
w Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
minutes for the Off time.
12.
Set the timer program.
q Press the TUNING/PRESET knob !4 or ENTER
button v to decide the timer program setting.
Timer indicator lights up and setting contents are
scrolled.
Note
• Timer program can activate regardless of power on or
standby mode.
• When timer program is finished, the unit goes to standby
mode.
• You can cancel the Timer program setting procedure at
any time by pressing the TIMER button ⁄7 .
7 Confirm and change timer program
• You can check and change the timer program setting as
follows.
Press the TIMER button ⁄7 .
1.
Either turn the TUNING/PRESET knob !4 or press the
2.
CHANNEL/CONTROL button ⁄4 to select timer program
number.
3.
You can change the displayed contents with the
TUNING/PRESET knob !4 or CHANNEL/CONTROL ⁄4
and ENTER buttons v if necessary.
Note
• Timer program is not changed if you quit confirming
halfway through a procedure.
time and press the
7 Timer program off
Press the TIMER button ⁄7 , "TIMER PROGRAM 1" is
1.
displayed.
Either turn the TUNING/PRESET knob !4 or press the
2.
CHANNEL/CONTROL button ⁄4 to select timer program
number.
Press the TUNING/PRESET knob !4 or ENTER button
3.
v, "TIMER PROGRAM x SET" is displayed.
Either turn the TUNING/PRESET knob !4 or press the
4.
CHANNEL/CONTROL button ⁄4 to select "TIMER
PROGRAM x OFF".
Press the TUNING/PRESET knob !4 or ENTER button
5.
v to turn off the timer program.
Note
• To turn a timer program back on again, repeat this
procedure and select "TIMER PROGRAM x ON".
FM/AM TUNER ST7001 FM/AM TUNER ST7001
STANDBY STANDBY
POWER POWER ON/STANDBY ON/STANDBY
CATEGORY CATEGORY DISPLAY DISPLAY
STANDBY
1
4
7
DIMMER
10
TUNING
BAND
v
A-PRESET
/A-TUNE
CHANNEL/
CONTROL
A/B
G/H
SLEEP TIMER
REMOTE CONTROLLER
RC7001ST
TUNING/PRESET TUNING/PRESET
SLEEP SLEEP TIMER TIMER TUNED TUNED STEREO STEREO
MENU MENU A—PRESET PRESET BAND SELECT BAND SELECT
PUSH ENTER PUSH ENTER
!4
ON
2 3
5 6
8 9
DISPLAY
T
MENU
SHIFT
⁄4
C/D E/F
I/J T-MODE
MEMO
⁄7
21