Function Description - Samsung AW0801B Service Manual

3-2 Function Description

Timer indicator
Remote control
sensor
Fan speed
adjustment button
3-2-1 Cooling operation mode
The compressor is turned on and off according to the ambient temperature and set temperature.
1) Compressor on and off control
• Compressor on and off control according to the ambient temperature
The compressor is turned off when "ambient temperature = set temperature
*
The compressor is turned on when "ambient temperature = set temperature +1˚C"
*
2) Default value after power reset
3) Set temperature indicating (setting) range : 1˚F interval from 64˚F to 86˚F.
3-2-2 Fan operation mode
1) If "Fan operation mode" signal is received from remocon or panel.
the compressor is immediately turned off and only fan motor is operated at set blowing speed.
it changes such as "High
2) The initial Fan motor speed is set to "High".
3) The set temperature can not be indicated and set.
3-2-3 Energy saver operation mode
* If the compressor turn off at the cooling operation, the fan motor turn off after operation during the fixation
time only, and operation that energy saver by turn off the fixation time only, and operation that energy saver
by turn off the motor continuously before the condition of the compressor on.
* The fan motor is not operated at flow wind operation.
* Energy saver operation specification at the cooling operation.
1) Fan motor control in compressor on : operate with setting wind speed
2) Fan motor control in compressor off : After compressor off, the fan motor is operated breeze for 2 minutes
and then it turn off.
3) After the fan motor off, the compressor and fan motor is operated normally when the compressor on.
3-2
Temperature
adjustment buttons
set temperature = 75˚F
Fan speed = High
Med Low High"( if Fan speed is selected).
Temperature/Timer
settings
Energy Saver indicator
Dry adjustment indicator
On/Off button
Mode selection button
(Cool, Fan, Dry)
Samsung Electronics