Network Scanner Function; Setting Up The Scanner Configuration Using The Communications Utility - Panasonic DP-8020E Operating Instructions Manual

Network Scanner Function

■ Setting up the Scanner Configuration using the Communications Utility

1
Right-Click "Panasonic
Communications Utility" icon on
the Task Bar, and then select
"Scanner Configuration...".
2
Check "Auto Registration", and
then enter the Name and Key
Name to be saved into the
machine. (Max. 15 characters)
1
2
3
Click "OK".
2
1
Refer to right column.
Click "Add Device" if your PC address
information is registered onto the machines
located on the different subnet.
1 4
2
3
●
Network Scanner Function is not available for
DP-8016P.
Click "Add".
1
4
Click "OK".
2 Enter the
machine's
Device
Name, and
IP Address.
3 Click "OK".
27