Techni-Lux MagicQ Pro Series User Manual page 357

MagicQ User Manual
Step through Cue Stack
Step back up Cue Stack
Go to next step without time
Go back a step without time
Reassert Playback
Take manual control of Playback
Change chase / FX speed live
Go to Cue ID 2
Release Playback with 3 sec time
Release all Playbacks
Release all test Playbacks/Cues/Cue Stacks
Enter/exit Blind with 3 sec time
Make Cue Stack default all pages
Default all attribs
Default position attribs
Default colour attribs
Default beam attribs
Default intensity attribs
Make active all attribs
Make active pos attribs
Make active colour attribs
Make active beam attribs
Make active int attribs
Make hard all attribs
Make hard pos attribs
Make hard colour attribs
Make hard beam attribs
Make hard int attribs
Load Cue from Playback
Load Cue ID 2
Load Cue at 40%
Load Cue at current level
Load entire state of Cue Stack
Load selected heads from Cue
Load selected heads pos from Cue
Load selected heads colour from Cue
Load selected heads beam from Cue
Load selected heads int from Cue
Load from DMX
Snapshot output cues
Snapshot active values
Table 45.7: Playback
Table 45.8: Loading Values into the Programmer
>
pass:[
(also SHIFT + >)]
>>
<<
S + FLASH button
S + move manual fader
S + turn encoder X
S 2 ENTER
S 3 REL
SHIFT + RELEASE
CTRL + RELEASE
3 BLIND
Change to Page 1, PLAYBACK, <Default Cue Stack>
Select heads, LOCATE
Select heads <POS + LOCATE>
Select heads <COLOR + LOCATE>
Select heads <BEAM + LOCATE>
Select heads <INT + LOCATE>
Select heads, <* + SET>
Select heads, <POS + SET>
Select heads, <COLOR + SET>
Select heads, <BEAM + SET>
Select heads, <INT + SET>
Select heads, <* + MOVE>
Select heads, <POS + MOVE>
Select heads, <COLOR + MOVE>
Select heads, <BEAM + MOVE>
Select heads, <INT + MOVE>
INC <S>
2 INC <S>
@ 40 INC <S>
@ INC <S>
ALL + INCLUDE
<* + INC> <S>
<POS + INC> <S>
<COLOR + INC> <S>
<BEAM + INC> <S>
<INT + INC> <S>
Select heads, <CTRL + INC> ENTER
PROG, <Snapshot>
THRU RECORD
328 / 348