Attribute Encoders; Preload; Wallpaper; Special Options - Techni-Lux MagicQ Pro Series User Manual

MagicQ User Manual

20.9 Attribute Encoders

The attribute encoder acts like the encoders in the Intensity, Position, Colour, Beam windows, affecting the currently selected
heads.

20.10 Preload

The Preload function allows execute window items to be selected before the change is applied. Press the PRELOAD soft button
to start selecting/deselecting items. MagicQ will show the items selected/deselected but will not apply them until the PRELOAD
GO soft button is pressed. The Busking Rate Master can be used in conjunction with this feature to allow all the items to fade at
the same time.

20.11 Wallpaper

It is possible to set a background wallpaper using the SET WALLPAPER soft button. The wallpaper should be a bmp or jpeg of
the size set by the WIN SIZE button. For MagicQ consoles the internal touch screen is 800x600 resolution.
Use SHIFT + CLR WALLPAPER to remove the wallpaper.

20.12 Special Options

There are a number of special options that can be assigned as buttons using the ASSIGN SPECIAL soft button. These include:
Exec Page, Exec Page Up, Exec Page Dn
Blind, Close, Clear, Locate
Enable Zone, Disable Zone, Set Hot Zone, Clear Hot Zone
Global Tap
Powerdown
Lamp On, Lamp Off, Reset
Lamp On All, Lamp Of All
Preload
Setup Option
Encoder
Keylock
Buttons to change Execute Grid
Useful buttons in Execute Grids
Management of multiple universe zones
Global Tap to Time button
Immediate shut down of the PC
Affects selected heads
Lamp On/Off whole lighting rig
Enter/leave preload mode
Change a Setup option
Add a rate or attribute encoder
Lock the Execute Window so users cannot change / shut
down
151 / 348