Tips - Denon PMA-50 Owner's Manual

Contents Connections

Tips

I want to turn on power to this unit from a Bluetooth device
Once you perform paring between this unit and a Bluetooth device, you can turn on power to this unit by operating the Bluetooth device. Select
0
"PMA-50" from the list of Bluetooth devices to turn on power to this unit.
I want to switch the connection to a different Bluetooth device
This unit can only output music from one connected Bluetooth device, but up to 3 Bluetooth devices can simultaneously be connected. To switch the
0
connection easily, always have the frequently used Bluetooth devices connected. When multiple Bluetooth devices are connected and you want to
switch to a different Bluetooth device, stop playback on the device that is currently played back and play back the Bluetooth device that you want to
output music from. (v p. 44)
I want to connect to an NFC enabled device via NFC
Enable the NFC function on an NFC enabled device, and touch the N mark (Q) on this unit with the NFC device. (v p. 42)
0
I want to adjust the tone myself
Adjust the "Bass", "Treble" and "Balance" in the setup menu to the desired levels.
0
I want sound playback that is faithful to the original sound
Set "Source Direct" in the setup menu to "On".
0
Front panel Display
Playback Setting procedure
Rear panel 50
Tips
Remote Index
Appendix