Marantz SR7002 User Manual
  1. Manuals
  2. Brands
  3. Marantz Manuals
  4. Stereo Receiver
  5. SR7002
  6. User manual

Marantz SR7002 User Manual

User guide av surround receiver
Hide thumbs Also See for SR7002:
Table of Contents

Advertisement

Quick Links

Model SR7002/SR8002 User Guide
AV Surround Receiver

Advertisement

Table of Contents
loading

Related Manuals for Marantz SR7002

Summary of Contents for Marantz SR7002

  • Page 1 Model SR7002/SR8002 User Guide AV Surround Receiver...

  • Page 2: Important Safety Instructions

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...

  • Page 3: Declaration Of Conformity

    NEC - NATIONAL ELECTRICAL CODE Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. DECLARATION OF CONFORMITY U.S. Responsible Party: Marantz America, Inc. 100 Corporate Drive, Mahwah, NJ, 07430, U.S.A. TEL: 630-741-0300 Type of Product:...

  • Page 4: Introduction

    Thank you for purchasing the Marantz SR7002/SR8002 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR7002/ SR8002.

  • Page 5: Table Of Contents

    Enormous power reserves endow the system with substantial dynamic ability at high sound levels. 110 watts (SR7002) / 125 watts (SR8002) to each of the 7 main channels the power amp section features an advanced, premium high-storage power supply capacitors, and fully discrete output stages housed in cast aluminum heat sinks .

  • Page 6: Description

    • Assignable Video Input • Auto Lipsync (Audio Delay) The new generation of Marantz Receivers is stylish and completely symmetrical. On the front panel of the unit, • 7 × 110 Watts (8 Ohms), Discrete Amplifi ers buttons are kept to a minimum. Source selectors and (SR8002: 7 ×...
  • Page 7 Only receiver and controller products bearing the This product is manufactured under license from THX Surround EX logo, when in the THX Surround Neural Audio Corporation and THX Ltd. Marantz EX mode, faithfully reproduce this new technology hereby grants the user a non-exclusive, non- in the home.
  • Page 8 Manufactured under license under U.S. Patent Dolby Pro Logic IIx is fully compatible with Dolby #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; Surround Pro Logic technology and can optimally 6,226,616; 6,487,535 & other U.S. and worldwide decode the thousands of commercially available patents issued &...

  • Page 9: Before Use

    Do not touch hot spots and that exist in your area. especially the top panel. Contact with hot areas can SR7002/SR8002 can be powered by 120V AC only. cause burns. COPYRIGHT Recording and playback of any material may Opening and closing the front panel door require consent.

  • Page 10: Operation Of Remote Controller

    Operate the remote controller within a distance of of the remote controller only. approx. 5m from the infrared receptor window on the <RC8001SR> front of the unit. Remove the back cover. SR7002/8002 SURR INPU SELE OUND CTOR RECE...

  • Page 11: Names And Function

    NAMES AND FUNCTION FRONT PANEL ty u io!0 ! 1 AV SURROUND RECEIVER SR8002 INPUT SELECTOR PURE DIRECT DISP MULTI AUTO TUNED SPKR A B V-OFF PEAK ANALOG DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT M-DAX SURROUND MULTI MODE AUTO...

  • Page 12: Fl Display And Indicater

    FL DISPLAY AND INDICATER k ¡0 ¡2 ¡1 ¡3 DISP MULTI AUTO TUNED V – OFF NIGHT PEAK SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 SPKR A B M-DAX M-DAX ™2 ™1 ™0 ¡9 DISP (Display Off) indicator SPKR (speaker) AB indicator This indicator is illuminated when this unit is in the This indicator is illuminated when the speaker...

  • Page 13: Rear Panel

    A component connected here may be left on permanently, or may be switched off with via its own • The SR7002 does not use Multiroom audio output power switch. Caution: •...

  • Page 14: Remote Control Operation (Rc8001Sr)

    REMOTE CONT. IN/OUT terminals REMOTE CONTROL Connect to a Marantz component equipped with remote control (RC-5) terminals. OPERATION (RC8001SR) AUDIO IN/OUT (TV, DVD, VCR1, NAME AND FUNCTION DSS/VCR2, TAPE, CD/CDR) These are the analog audio inputs and outputs. The provided remote controller is a universal There are 6 audio inputs and 4 audio outputs.

  • Page 15: Lcd Indicators (Rc8001Sr)

    ⁄7 (7) DISP. button Selects the display mode for the front display of the (when AMP mode is selected) unit. This button is used to call up the SETUP MAIN (8) OSD button MENU of the unit. When this button is pressed, the current setting are displayed on the TV monitor.

  • Page 16: Setting The Time

    To control the unit by your RC8001SR, you have to select the device AMP or TUNER by pressing the function selector button. Please refer below for the details in AMP and TUNER mode. AMP MODE SOURCE ON/OFF Turns the SR7002/SR8002 on and off POWER ON Turns the SR7002/SR8002 on POWER OFF...

  • Page 17: Controlling Marantz Components

    Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide. • It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) SOURCE ON/OFF Turns the DVD player on and off POWER ON...
  • Page 18 MEMO TUNER CD-R TAPE AUX1 AUX2 LIGHT RC8001SR Learning Remote Controller CONTROLLING A MARANTZ CD RECORDER (CDR MODE) SOURCE ON/OFF Turns the CD recorder on and off POWER ON Turns the CD recorder on POWER POWER ON/OFF ON/OFF POWER OFF...
  • Page 19 CONTROLLING A MARANTZ TAPE DECK (TAPE MODE) SOURCE ON/OFF Turns the TAPE deck on and off POWER ON Turns the TAPE deck on POWER POWER ON/OFF ON/OFF POWER OFF Turns the TAPE deck off SOURCE SOURCE D1 - D5 / >(Page) (Refer to page vi)

  • Page 20: Basic Operation

    DVD. Pressing the SOURCE button once changes the remote control to the settings for the source that • When using Marantz products, TV and DVD can was pressed. be set to TV1 (TV/VDP: Projector) and TV2 (PDP: To change the amplifi...
  • Page 21 For codes which are not learned, the remote controller will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer.
  • Page 22 ERASING PROGRAMMED CODES Press the DVD source button . (RETURNING TO INITIAL SETTINGS) indicator blinks. NAME The “ ” blinks to indicate that the letter can be Codes can be erased in fi ve ways: by buttons, direct changed. buttons, direct button pages, sources, and by all Press the 2 cursor button twice.

  • Page 23: Programming Macros

    Erasing All Note: This procedure clears (resets) all programmed codes and names. Once all the data is cleared, the memory is returned to the factory default status. The programmed macros are also erased. • No signals are transmitted while programming a •...
  • Page 24 Press the D4 (MACRO) direct button. Press the D4 (MACRO) direct button. The macro menu is displayed. The macro menu is displayed. MACRO indicator displays and LEARN blinks. Press the D1 (M-01) direct button . Press the D1 (M-01) direct button. The NAME is displayed.

  • Page 25: Clone Mode

    SETTING THE MACRO TIMER EXECUTING THE MACRO TIMER Setting the macro timer enables the macro program The macro program starts when the time that was to automatically turn the power for a device on or off set is reached. The TIMER or perform other operations.

  • Page 26: Setup

    SETTING THE MACRO INTERVAL TIME Once copying is completed, press the M button on both remote controllers. When a macro program is executed, control signals are transmitted in sequence. This transmission interval (interval time) can be set in 0.5-seconds units from 0.5 to 5 seconds.

  • Page 27: Renote Control Operation (Rc101)

    This button is used to set the zone area. • Zone A: MULTI ROOM A • Zone B: MULTI ROOM B (The SR7002 does not use this zone.) • Zone C: The unit does not use this zone. • Zone D: MAIN ROOM ⁄2...

  • Page 28: General Information Of Rc101 To The Unit

    GENERAL INFORMATION OF RC101 TO THE UNIT The included remote controller can be used in multi-room systems. Using this remote controller, you can operate the unit through infrared receivers or the infrared receptor of Marantz products in multiple rooms. Zone A: Multi room A control Zone B: Multi room B control Zone C: The unit does not use this zone.
  • Page 29 CONTROLLING A MARANTZ DVD PLAYER (DVD) CONTROLLING A MARANTZ VCR DECK (VCR1/ VCR2) • (*) RC101 dose not have the PRESET code library for this key. • RC101 dose not have the PRESET code library for SOURCE ON/OFF Turns the DVD Player on and off...
  • Page 30 CONTROLLING A MARANTZ CD PLAYER (CD) CONTROLLING A MARANTZ CD RECORDER (CDR) • (*) RC101 dose not have the PRESET code library • RC101 dose not have the PRESET code library for for this key. this device. SOURCE ON/OFF Turns the CD Player on and off...

  • Page 31: Basic Operation

    NORMAL MODE (When operating Marantz AV equipment products) This remote controller is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER 1, TUNER 2, CD, CD-R, TAPE (tape deck), AUX1 and AUX2.
  • Page 32 SEND indicator signal transmitter is facing the infrared signal blinks twice. receiver on the Marantz remote controller at a • When the SEND indicator blinks once, distance of about 2 inches (5 cm). • When the memory of the RC101 is full, the Repeat steps same SOURCE.

  • Page 33: Other Operations

    (When operating the unit by Multi Zone connected) • Zone A: MULTI ROOM A Control (Default) • Zone B: MULTI ROOM B Control (The SR7002 does not use this zone.) Then back lights tune off. • Zone C: The unit does not use this zone.

  • Page 34: Connections

    Surround left and right speakers CONNECTIONS When this unit is used in surround operation, the preferred location for surround speakers is on the side walls of the room, at or slightly behind the SPEAKER PLACEMENT listening position. The center of the speaker should face into the room. The ideal surround speaker system for this unit is 7- speaker systems, using front left and right speakers, Surround back left and right speakers...

  • Page 35: Connecting Audio Components

    Caution: CONNECTING AUDIO COMPONENTS • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.

  • Page 36: Connecting Video Components

    CONNECTING VIDEO COMPONENTS DVD player COMPONENT DIGITAL AUDIO VIDEO COMPONENT S-VIDEO VIDEO IN VIDEO OUT AUDIO AUDIO VIDEO S-VIDEO OUT IN VIDEO Satellite Tuner PROJECTOR S-VIDEO DIGITAL AUDIO VIDEO AUDIO VIDEO VIDEO VIDEO, S-VIDEO, COMPONENT JACKS There are 3 types of video jacks on the rear panel. VIDEO jack The video signal for the VIDEO jacks is the conventional composite video signal.

  • Page 37: Connecting Hdmi Components

    CONNECTING HDMI COMPONENTS HDMI JACK This unit has four HDMI inputs and two HDMI output. It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed.

  • Page 38: Advanced Connecting

    Therefore you need to aim the remote control only at the unit. Also, if a Marantz power amplifi er (some models excluded) is connected to one of these terminals, the power amplifi er’s, power switch is synchronized with this unit’s power switch.

  • Page 39: Connecting The Antenna Terminals

    CONNECTING THE ANTENNA TERMINALS FM Feeder Antenna (For SR8002) FM External FM Antenna Antenna (For SR7002) Antenna Converter (SR8002 Only) FM ( 75 ) ) ASSEMBLING THE AM LOOP ANTENNA Release the vinyl tie and take out the connection line.

  • Page 40: Xm Radio Overview

    XM RADIO OVERVIEW This unit is the XM Ready ® receiver. You can receive XM Satellite Radio and Home Dock (sold separately) and subscribing the XM service. Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM. XM Satellite Radio which includes: •...

  • Page 41: Connecting For The Multi Room

    CONNECTING FOR THE MULTI ROOM MULTI SPEAKER SUB SPEAKER : 6-8 OHMS MULTIROOM B IR RECEIVER FRONT Note: The SR7002 does not use MULTIROOM B. MULTIROOM A AKER MULTIROOM /SPEAKER C KER C OHMS RC IN FRONT IR RECEIVER RC OUT...

  • Page 42: Connecting Other Equipment

    CONNECTING OTHER EQUIPMENT a RS232C g IR RECEIVER IN (SR8002 Only) Connect an external control device or other device for This unit can be operated by remote controller servicing. (Use a straight cable for the connection.) without using the internal IR receiver, by connecting an external IR receiver.

  • Page 43: Setup

    LEFT button OK button LIP·SYNC PREV GUIDE MENU TEST CH.SEL MENU button 7.1CH Press this button to display the OSD menu system. SR7002/SR8002 FRONT BUTTON CONTROL UP button MULTI AUTO MULTI SPEAKER BAND 7.1CH INPUT DISPLAY LEFT button ENTER MENU...
  • Page 44 N E X T E X I T R E T U R N “4. VIDEO SETUP” (P. 53) Note: • The SR7002 does not have “COMPO OUT2” Sub-menus. MAIN MENU M A I N M E N U S E T U P...

  • Page 45: Input Setup

    1 INPUT SETUP This menu is for setting the matching the output of connected audio devices and the input jacks of this unit. • FUNC INPUT SETUP : “1-1 FUNC INPUT SETUP” (see page 43) • 7.1 CH INPUT SETUP : “1-2 7.1 CH INPUT SETUP”...
  • Page 46 1-1 FUNC INPUT SETUP HDMI Assign the number of an HDMI input jack to the (ASSIGNABLE DIGITAL INPUT) device. The 6 and F (Front) digital inputs can be assigned to Note: a desired source. • When FUNCTION MODE is set to HDMI and HDMI and COMPONENT inputs can be assigned to HDMI AUDIO of “5.
  • Page 47 1-3 FUNCTION RENAME Input sources can be registered under any name. This menu is for renaming input source. BACK: This menu is for renaming function name. Names can be up to 10 characters long, including spaces. (Characters are selected from those appearing on DEFAULT: the display.) This name appears on the unit's FL display and the OSD, but it does not appear in the...

  • Page 48: Spkr (Speaker) Setup

    2 SPKR (SPEAKER) SETUP After you have installed the unit connected all the components and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout. Before you perform the following settings, it is important that you first determine the following characteristics:...
  • Page 49 2-1 AUTO SETUP (MultEQ™ SETUP) The AUTO SETUP (MultEQ™ Setup) feature of the unit measures sound characteristics of the speaker system and room where the unit is used and automatically optimizes settings. The Audyssey MultEQ™ technology adopted by this unit provides the best listening environment for multiple listeners.
  • Page 50 [Example] Confi rmation screen for speaker size and Checking Measurement Results When calculations for the measurement results end, a screen appears for confirming the calculation results. C H E C K R E S U L T S P E A K E R C O N F I G S P E A K E R S I Z E...

  • Page 51: Error Messages

    ERROR MESSAGES Displayed Error MIC SET ERROR!! A U T O S E T U P A U T O S E T U P : S T A R T M A I N R O O M S U R R B A C K : 2 C H M I C...
  • Page 52 If you are unsure, have This setting has effect only during playback of your Marantz dealer perform the installation for you. They are trained professionals familiar with even PCM or analog stereo sources.
  • Page 53 SUB W: TEST MODE: Set the distance from the subwoofer to your normal listening position. SURR. B L: Set the distance from the surround back left If you select “AUTO”, the test tone will be cycled speaker to your normal listening position. through in a circular pattern beginning at Left →...

  • Page 54: Surround Setup

    3 SURROUND SETUP This menu is for setting surround effect parameters for the various surround input signals so as to bring out the live audio effect of your speaker system. • CHANNEL LEVEL: “3-1 CHANNEL LEVEL” (see page 51) • PLIIx MUSIC PARAMETER: “3-2 PLIIx MUSIC PARAMETER”...
  • Page 55 SUB W LEVEL: 3-2 PL Set the effect level of the subwoofer speaker Pro LogicIIx-Music mode creates a rich and between –18 and +12 level in 0.5 level interval . enveloping surround ambience from stereo sources • If “NONE” was selected for the subwoofer speaker such as CDs.

  • Page 56: Video Setup

    66) • COMPONENT OUT 2 • OSD INFO (This feature is not available on the SR7002.) Select the OSD information function to “ENABLE” This setting is for selecting whether to output or “DISABLE” with the 1 or 2 cursor buttons.

  • Page 57: Preference

    : - 9 0 d B L E V B A C K E X I T R E T U R N B A C K E X I T (The SR7002 is not equipped with the MULTI ROOM SETUP B feature)
  • Page 58 Select “ENABLE” with other rooms in the multi room system. (The SR7002 the 1 or 2 cursor buttons to enable OSD INFO or has only one other room in the multi-room system.) “DISABLE”...

  • Page 59: Acoustic Eq

    6 ACOUSTIC EQ This display is for setting up the equalizer and changing the Equalizer mode. After you complete this portion of the setup, move the • PRESET G. EQ ADJ : cursor to “RETURN” with the 3, 4, 1 and 2 cursor “6-1 PRESET G.
  • Page 60 6-1 PRESET G. EQ ADJ 6-2 CHECK AUTO These modes allow you to set a 9-band graphic These menus are for confirming the results of equalizer for each of the 7 channels. AUTO SETUP function equalizer measurement (AUDYSSEY, FRONT, FLAT). Select “6.

  • Page 61: Basic Operation (Play Back)

    SELECTING THE SURROUND MODE BASIC OPERATION Example: AUTO SURROUND (PLAY BACK) SELECTING AN INPUT SOURCE Before you can listen to any input media, you must fi rst select the input source on the unit. Example : DVD AV SURROUND RECEIVER SR8002 INPUT SELECTOR PURE DIRECT DISP...

  • Page 62: Adjusting The Tone (Bass & Treble) Control

    • The tone control function is not available when ACOUSTIC EQ is being used. • Additionally, tone control is not available during M-DAX (Marantz Dynamic Audio eXpander) Dolby TrueHD, Dolby Digital Plus, or DTS-HD playback. TEMPORARILY TURNING OFF THE SOUND LIP.SYNC...

  • Page 63: I/P Convert

    Notes: I/P CONVERT • The HDMI video signal input from the playback device is not output from the VIDEO or S-VIDEO The video circuit of the unit is equipped with an I/P MONITOR OUT terminals of the unit. conversion feature. When this feature is on, 480i analog video signals •...
  • Page 64 Output Channel Surround Mode Input Signal Decoding DOLBY Dolby Surr.EX Dolby Digital EX (PLIIx movie) Dolby D (5.1ch) Dolby Digital 5.1 (PLIIx music) Dolby D (5.1ch) Dolby Digital 5.1 + PLIIx (PLIIx game) Dolby D (2ch) Pro Logic IIx Dolby D (2ch Surr) Pro Logic IIx Dolby Digital Plus (5.1) DolbyDigital +...
  • Page 65 AUTO EX/ES When this mode is selected, the unit determines This mode provides 6.1 channel surround for Dolby whether the digital input signal is Dolby Digital, Digital EX, and DTS-ES-encoded source material Dolby Digital Surround EX, Dolby Digital Plus, Dolby such as DVD.
  • Page 66 STEREO THX Surround EX will operate for any 5.1 channel source whenever THX is active. This mode bypasses all surround processing. THX Surround EX is not available in system without In stereo program sources, the left and right channels surround back speaker(s). play normally when PCM audio or analog stereo is input.

  • Page 67: Other Function

    RECORDING AN ANALOG SOURCE OTHER FUNCTION In normal operation, the audio or video source selected for listening through this unit is sent to the DISPLAY MODE record outputs. This means that any program you are watching AV SURROUND RECEIVER SR8002 or listening to may be recorded simply by placing LIP.SYNC PREV...

  • Page 68: Dolby Headphone Mode

    DOLBY HEADPHONE MODE ATTENUATION TO ANALOG INPUT SIGNAL This feature simulates the waveforms of the actual sounds heard from the speakers. When headphones are used, the MENU button automatically switches to the Dolby headphone mode. The OSD that appears when the MENU button is pressed is shown below.

  • Page 69: Aux2 Input

    AUX2 INPUT If you don’t need to connect 7.1 Ch. input terminals with multi channel decoder, L(front left) and R (front right) inputs terminals are available as AUX2 input. In this case, You can connect additional audio source to AUX2 as other audio input terminals. AV SURROUND RECEIVER SR8002 INPUT SELECTOR PURE DIRECT...

  • Page 70: Basic Operation (Tuner)

    (Using the unit) BASIC OPERATION Turn the INPUT SELECTOR knob to select (TUNER) “TUNER”. Press the BAND button to select either FM or To operate the unit from the remote controller, press the TUNER button on the remote controller so that Press the 3 or 4 cursor buttons on the front the tuner mode is engaged.

  • Page 71: Preset Memory

    This function automatically scans the FM and AM changed when BAND is set to AM. band and enters all stations with proper signal • The SR7002 does not display the mode on the FL strength into the memory. display when the TUNER MODE is switched.
  • Page 72 RECALLING A PRESET STATION You can fast forward the preset stations, press the CH+ continuously. When the desired preset station is received, TUNER TUNER CD-R cancel the preset scan operation by pressing TAPE AUX1 AUX2 LIGHT the CLEAR button or P-SCAN (D4) on the RC8001SR remote controller.

  • Page 73: (Sr8002 Only)

    NAME INPUT OF THE PRESET STATION. This function allows the name of each preset channel to be entered using alphanumeric characters. Before name inputting, you need to store preset stations with the preset memory operation. 2. 5. 6. AV SURROUND RECEIVER SR8002 INPUT SELECTOR VOLUME PURE DIRECT...
  • Page 74 HD RADIO AUTO TUNING SWITCHING HD-RADIO INFORMATION INTHE FRONT PANEL FL DISPLAY You can display HD Radio information (such as station name, artist name/song title or signal status) for the channel currently selected in the front panel FL display. PURE DIRECT SURROUND DISP MULTI...
  • Page 75 This TUNER information can also be displayed on a SELECTING MULTICAST CHANNELS TV-monitor connected to the SR8002. FM HD Radio stations can transmit multiple programs on the same frequency by using what are called 7.1CH SPK-AB MULTICAST CHANNELS. DISP SLEEP CLEAR MEMO TUNER...

  • Page 76: Rbds Operation (Sr8002 Only)

    Notes: RBDS OPERATION (SR8002 ONLY) When the unit receives the RDBS text data from a RBDS (Radio Broadcast Data System) is a description station, the station name is displayed. If the signal from the radio station is weak, text data may be of the station’s programming hidden space in the FM displayed intermittently or not all.

  • Page 77: Listening To Xm Satellite Radio

    CHECKING THE XM SIGNAL STRENGTH LISTENING TO XM SATELLITE RADIO AND RADIO ID SELECTING AN INPUT SOURCE Before you can listen to XM Satellite Radio, you must fi rst select the input source on the unit. AV SURROUND RECEIVER SR8002 INPUT SELECTOR PAGE PURE DIRECT...

  • Page 78: Search Mode

    When the Artist name/Song title is displayed: This XM information can also be displayed on a TV monitor connected to the unit. N A M E / T I T L E P i n k F l o i d F l o i d M o n e y The “NAME/TITLE”...

  • Page 79: Preset Memory

    CATEGORY SEARCH MODE CHANNEL DIRECT CALL You can select the desired channel from the category You can select the desired channel by directly tapping allocated to each channel. the numeric keypads on the remote controller. Category being aired can be only selected. DIRECT SURROUND DISP...
  • Page 80 PRESET SCAN CLEARING STORED PRESET STATIONS You can remove preset stations from the memory using the following procedure. 3.5. PAGE SPKR A B V-OFF PEAK ANALOG DISC 6.1 MT X 6.1 NIGHT DIGITAL BAND T-MODE DISPLAY TUNER TUNER CD-R LIP.SYNC PREV MUTE ENTER...

  • Page 81: Multi Room System

    MULTI OUT A and B AUDIO output terminals to the MULTI ROOM A and B amps. Note: • The SR7002 does not have a MULTI ROOM B setting. Connect the VIDEO output (MULTI OUT) terminal to the monitor in Room A.

  • Page 82: Operation Of The Multi Room Outputs With

    You must listen to the same station as the main Room A output can be operated from a room room. where the unit (SR7002 or SR8002) is not installed. This requires a separately sold IR receiver. (For connections, see page 37.)

  • Page 83: Troubleshooting

    If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz authorized dealer or the Marantz Service Center in your country.

  • Page 84: Hdmi

    HDMI SYMPTOM CAUSE The display does not The connected monitor or projector appear over an HDMI does not support HDCP. connection. The HDMI input of on the TV is Set HDMI input so that it turns on, as not on. explained in the TV's instruction manual.

  • Page 85: Technical Specifications

    HD Radio (SR8002 only) ...1 kHz 85 dB ...6.7A (SR8002) Alternate Channel Selectivity ...± 400 kHz 60 dB Weight ...33.1 lbs (15.0 Kg) (SR7002) Image Rejection ...98.1 MHz 70 dB ...33.1 lbs (15.0 Kg) (SR8002) Tuner Output Level ... 1 kHz, ± 75 kHz Dev 800 mV DIMENSIONS Frequency Range ...
  • Page 86 Harman/ Kardon Integra AMPLIFIER Source button name : AMP Brand name Setup code Kenwood Amstrad 0105 Arcam 0296 Magnavox Audiolab 0296 Carver 0296 Marantz 0105 Micromega Genexxa 0422 Musicmagic Grundig 0296 Myryad Harman/Kardon 0919 0358 Norcent Left Coast 0919 Onkyo...
  • Page 87 1032 Carver Orbitech 1127 Grundig Pace 0482, 0874, 1202, 1350 Harman/Kardon Panasonic 0274, 0728, 0874, 1347 Magnavox Panda 0482 Marantz Paysat 0751 Myryad Philips 1169, 0776, 1776, 0751, 1103, 0749, 0160, 0227, Optimus 0482, 0880 Philips Pioneer 0880 Pioneer Promax...
  • Page 88 Source button name : TV Source button name : TV Brand name Setup code Brand name Chun Yun 0027, 0207, 0036, 0119 Chung Hsin 0207, 0080, 0135 Cimline 0036 Cineral 0478, 0119 Gateway Citizen 0087, 0057, 0119 Geloso Clarion 0207 Genexxa Clarivox 0064...
  • Page 89 Loewe 0064, 0108, 1589 Logik 0267, 0099 Luxor 0075, 0131, 0070 M Electronic 0027 0062 0267, 0070 MGN Technology 0267 0267, 0027 Magnasonic 1305 Magnavox 0062, 0066, 0108, 0027, 1808 Magnin 0267 Manesth 0072, 0099 Marantz 0062, 0108 Marta 0064...
  • Page 90 Zenith 0066, 0060, 0027, 1506 0072 0075, 0834 0131, 0099 0267 Source button name : DVD 0064, 0108, 0131 Brand name Setup code 0064 MARANTZ DVD1 0001 0072, 0099 MARANTZ DVD2 0002 0108 Acoustic Solutions 0757 0641, 0643 Alba 0744...
  • Page 91 Source button name : DVD DIRECT BUTTON PAGE PAGE 1 FUNCTIONS (RC8001SR) Source button name : AMP PAGE Command Note PAGE 1 1 AUTO SELECT AUTO SURROUND PAGE 2 SELECT DOLBY MODE 3 DTS SELECT DTS MODE 4 EX/ES SELECT EX/ES 5 DIRECT SELECT PURE DIRECT PAGE 2...
  • Page 92 Magnavox ... 1003, 1052, 1053 Curtis Mathes ... 1003, 1013, 1025 1026, 1062, 1103, 1110 Daewoo ... 1003, 1013, 1024, 1035 Marantz ... 1003, 1031, 1067, 1122 1036, 1059, 1084, 1101 Mitsubishi ... 1003, 1024, 1051 Daytron ... 1003, 1013, 1016 Dimensia ...
  • Page 93 Koss ... 2058 SCOTT ... 3014 Magnavox ... 2007, 2011, 2023, 2025 SEARS ... 3012, 3014, 3020, 3028, 3042 Marantz ... 2025 SHARP ... 3028, 3042, 3077 Mitsubishi ... 2011, 2015 SHERWOOD ... 3042, 3056, 3070, 3078, 3024 Onkyo ... 2062 SHURE ...
  • Page 94 You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China 08/2007 00M35CW851250 mzh-d...

This manual is also suitable for:

Sr8002

Table of Contents