OLS-PGB/P Series
◆
Adjusts the Phase.
3-3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button.
◀
◀ button until you reach the optimal setting.
3-4. Press the
or
◆
Adjusts the Sharpness.
3-5. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button.
◀
◀ button until you reach the optimal setting.
3-6. Press the
or
4. Press the EXIT button or Back Select to exit.
17 of 33